Fitting a starter clutch on my gsxr750 1985 engine rebuild

[Jpich85]

I've just fitted the starter clutch, I've not much experience fitting these so I don't really know what's ok and what's not but after fitting it I've noticed the large cog has a bit of back and forth play in it and wasn't sure if that's normal or if I haven't fitting it correctly?

There's not really much too it but I thought I'd check with you guys in case something isn't correct,

It spins as it should I'm just not sure if the movement in the rear gear should be there

[Toecutter]

Movement of the gear is normal back and forth. It's all ok.