1216 bandit with bush pistons

[archmc1]

Hi I'm about to start a 1216 turbo bandit build and have a couple of questions.

iI assume a standard base gasket is used only with an 81mm cometic head gasket ?.

Is the piston skirt clearance just standard  ? .

 

many thanks

[gsx-f__k]

Hi.

Are you going to use a spacer plate (and for example 81mm busa pistons) or aftermarket low comp pistons?

[davecara]

You wont need a spacer plate unless you're using the busa rods too.