[GSXR1100WV Brand new clutch - Still slipping?]

Hi guys,

I've just replaced the clutch with new oem.

New parts include:

• Main clutch disk set (pn:2140040C01)
• 1x smaller clutch friction disk (pn:2144246E00)
• 1x tapered spring washer (pn:0916400007)
• 1x clutch pressure hub (pn:2146240C02) (old one was chewed up pretty bad)
• 1x thrust bearing (pn:0926315003)

I'm guessing I might also need to change the clutch sleeve hub (pn:2141046E00) I'm guessing its probably glazed over. I didn't notice that it was chewed up, just mirror smooth. Would it be worth going at it with some 400/600 grit sandpaper? or bin in? Unfortunately its a $200 part

After writing this... I've just realised I may have thrown out the clutch spring washer with the old pressure plate (pn:2162340C00)... Which is in the bin... and bin collection day... and now its gone... crap!

[swingarm options for '92 750w?]

Woot. Got the swingarm from show n go. really helpful mob. Good call on the chain adjusters too. sold separately... so would have forgotten them otherwise
Can't wait

[swingarm options for '92 750w?]

cheers.
Do I also need to buy the rear wheel also? Or just make new spacers? Because I kinf of just recently powder coated my rear wheel ^^;

[swingarm options for '92 750w?]

Vizman: bushwackers weren't interested in my creative plea... 36 more posts to go

Gamma: Thanks mate. You wouldn't happen to know the name of the mob would you?

Cheers

[swingarm options for '92 750w?]

Nice idea!

Those will be much easier to find. Would there be much work getting it to fit?

I have to admit though, the '95 swingarm is sexier though

So which admin will i need to grovel to so I can look at the buy/sell section?

28 days left until the mrs takes over...  so pressure is on to get this done haha

[swingarm options for '92 750w?]

Thanks guys.

Just called a few of the local wreckers here in Sydney... and no luck. Apparently these are quite sort after. One of the largest wreckers here sold one not too long ago for $600 AUD...

I know I don't have enough posts, but do you guys think if I ask admin nicely (pretty please) they can let me have access to the classified section?

My wife is moving in from overseas in about a month, so I need to spend my cash and build this thing before she can stop me  

[swingarm options for '92 750w?]

Hi guys,

Re: swingarm swaps, is it worthwhile changing the banana style for a braced design?

I have a '92/'93 750w. After a moderate stack with a cager, I've had the bike completely stripped. Frame and swingarm sand blasted.
Unfortunately, the current arm has a bit of a gash from where the exhaust hit.

I was going to polish it, but hasn't happened in 2 years. so gave up... so going to the powder coaters. So I guess I need to make up my mind.

I don't have much of a clue as to what will bolt in or even if its a worthwhile upgrade... though I can't say I like the look of the banana arm.
Though I'm a little worried I would have to replace all of the linkages or even the shock. Isn't a huge issue except it already has a nice ohlins damper.

Cheers