Dyo

any thanks to you guys ;-) I'll try to use these drawings first with thin material to have a look if the headers fits, than I need to build the real parts in V4A only once. The real fork is already mounted, the one from the GSX1100F fits perfekt in the frame. The front fork also fits, but I'm not so happy about the oilcooler-mounts. Have to play around a little bit where to place the oilcooler without making the stearingangle to smal. By the way, sorry for my bad english...

Yes I know the enginemounts are different, but is the position of the sprocket the same in GSX 750 and GSX 1100?

OK, thanks to the hint about these drawings. I don't know where the original Position of sprocket is, and theres no 1100 maschine to test it. Is it posible that the GS75X-maschine has the same mounts and position than the GS110X? Still have 750 motors mounted in an GS75X and also as parts. If it fits I can take the position from there.

Many Thanks ;-) This is exactly the stuff I was searching for. Why do anything, thats already testet by anotherone. @ Pruttelaap Nice work. Hope to get such an nice work, too.

I already saw these drawings, but the one I need is the small one on black ground. The other ones are for the EFE with a frame build of square-tubes. I don't know if these mounts also fits to the framebuild of round-tubes Does anybody know where to find the small drawing on black ground in a good size? Or may be someone has a file for CNC-maschines?

Hallo, I'm new here and hope to get some Information or Tips for a new project. The Frame is a GS110X Katana from 83 and the motor schould be a 1127 from a GSX1100F. I found a lot of comments about this combination by google, but every link that exists to the drawings for fitting enginemounts are dead. They all target to this board, but I think to an old version, cause there is nothing found on this page. Is there anybody, who kniows something about this combination or about the drawings for the mounts that was here a long time ago? Regards Dyo