Damianharris

All fixed now thanks for the help guys

Yes I did that.

I’ve done that. I’ve just checked the pick up again. The manual says it should read between 135-200 ohms . Mine is reading 164 so that’s ok.

The coils are already unbolted and off the bike. Only one of the coils don’t work. I wired the good coil into the bad side and didn’t get any spark. I run a multimeter from each end of the wire and the wire is good.

No I’ve managed to get a second hand one cheap so hopefully once I fit it and the new coils that will sort it . I will test for spark before I bolt everything back together .

I have already done that . The wiring is fine.

1 and 4

Hi guys my bike is only firing on 2 cylinders. I have tested the coils and one was bad and I have replaced the pair but it still isn’t producing spark. I have tested the wiring and it has the live like it should have but still no spark. I’m thinking the coil isn’t getting any pulse from the cdi telling it to fire. Any ideas if it could be anything else? I have checked the battery and that’s fine. Thanks for any help.