[GSXR1100 Friction plate questions]

No, but will try to get hold of one.

/D

 

[GSXR1100 Friction plate questions]

I'm using an ISR 17,5 mm master cylinder (like this: https://www.isrbrakes.se/products/mastercylinders/21-014.html). I'm beginning to suspect that it doesn't move enough fluid.  I'm gonna call the guy who makes them (a fellow Swede) tomorrow and ask for some specs. 

 

[GSXR1100 Friction plate questions]

Thanks.

I guess I'm looking for a wire operated (non-hydraulic) setup or a standard Bandit clutch then.

[GSXR1100 Friction plate questions]

Okidoki.

I'm from Sweden, 52 years of age and I am currently building a Kawa z1000j/Bandit1200 hybrid.

Best regards.

[GSXR1100 Friction plate questions]

Hi, I have a GSXR1100J clutch (the one with 11 friction plates and 4 springs) that I cant get to release and I suspect the friction plates. All of my 11 plates are identical but I seem to remember someone saying that the inner most plate should be lower/different. When I look at the exploded view on the micro fiches all of the 11 plates LOOK identical, but I'm running out of ideas to try so I thought I'd ask.

Another possible source of my problem might be the master cylinder (it's a Bandit engine). My pressure plate moves 2.2 mm when I pull the lever. Is that normal/enough for the plates to disengage?

Any help appreciated.