Wad325
-
Posts
23 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Wad325
-
-
Cheers will ask fb, cheers for replys have acquired a set of grumpy brackets so hopefully shouldn't be too much hassle mounting motor
-
Hi will 1127 gsxr engine work with bandit 1200 loom , and also any one used grumpy 1260 mounting kit thanks in advance
-
44 minutes ago, Wilko275 said:
Looks great.
What are you using? Front end and swingarm
Front is gsxr forks ,gsxr 3.5 wheel ,rear is gsx 1100 metmachex arm, think it's gsxr /bandit 6 4.5 wheel ,have got straight spoke bandit wheels 5.5 rear but don't want to go to large at mo on rear
-
48 minutes ago, mark35gun said:
looks good
Cheers bud
-
-
-
Yeah haven't got original swinging arm some looking for me bud
-
Frame been stoved bud and only got 14mm spindle any way bud someone having look see if got set out of swingarm but if you could look when back at work would be much appreciated mate
-
Excuse my English wasnt at school often
-
2 minutes ago, fatblokeonbandit said:
what size do you need,
I/D of 14mm same as spindle
O/D of 22mm same as original and 30 mm long???
do some measuring up, some bearing inners are available on their own..
Are they bud were from please mate ,tried ones or centre bush in bandit swinging arm roller and fitted perfect so just as you say 14id ones bud
-
Metmachex think it's for 1100 /gs1000 which believe have 16mm spindle bud
-
Yeah buddy but can't get sleeve on own don't think
-
-
Coils
in Air Cooled
Thanks for input will see what best option is cheers
-
Coils
in Air Cooled
Are these easy as to wire as once sort work out got income again may go that route
-
Coils
in Air Cooled
Got a set of Dyna coils 2.2ohm,do I need Dyna 2000 too run these ,standard engine as fast as I know cheers in advance
-
Cheers will put pics up soon
- 1
-
Cheers bud ,yeah bandit 1200 wheel ,early gsxr 750 /1100 USD forks on front well that's the plan ,and got metchamax gsx arm b6 wheel disc carrier etc so hopefully already on right track ,will mock up at week end and see how it goes cheers
- 1
-
Yeah didn't think be easy but will have to have a play cheers for reply
-
Hi just got myself 750 et which putting 1100 lump in ,have early gsxr USD front end with mk1 bandit wheelcan I keep speedo drive ,on back end got 4.5 600 wheel with 1500 Tyre in braced arm what spacers are needed and sprocket Carrier is required please go gently as new here cheers
Oil cooled in gsx et
in Oil Cooled
Posted
Hi has any one used grumpy 1260 engine mounting plates for oil cooled motor in gsx et got couple of questions to ask if so cheers in advance