Bigkev

Ok, think I’m on about something different but no worries can you help with any of the other stuff

I have one on the side of the carbs too

Mine is not under the engine cover it’s a black disc above the carbs

Hi peeps, im going to fit munit blue to my bandit,few things I’m unsure of. my ignition black box has tach/two wires for neutral and two which are signal two run to pulse generator (what is that? ) neutral switch has blue wire which goes to a diode then up to the dash light also on the neutral switch red/black from ignition unit a green/blue which goes back to the ignition unit and black/white which I think is the earth also do the oil , neutral fuel switches get power from at the dash ? I’m going to use a Koso DL-03SR I have drawn out a wiring diagram which I’ve attached does it look ok many thanks

Thanks bud, im not sure what loom wiring I need to keep and what to cut off wiring is not one of my best thing

Yeh don’t mind re wire just not sure what wires I’m going to need and what to cut out

Sent you a pm buddy thanks Kev

Thanks for your input bud so I have to leave wiring old loom in place and run new wiring?

Good afternoon peeps, im about to embark on wiring up an m unit blue on my 2003 600 bandit I’m not 100 % with wiring I can’t seem to get my head round it do I take all the wiring loom out then there’s the cdi do I use all the wiring from it? Would really appreciate it if you could help me Picture is off the bike work in progress and wiring diagram plus one to supply power to the cdi thanks Kev