[EFE CAMS]

PM… good warehouse;)

[EFE CAMS]

I‘m looking for the D Cams…

 

does anyone have any to give away?

 

[Awesome aircooled pictures]

[Adjust ignition Dyna S - EFE]

I have to apologize for the stupid question. I simply hadn't seen the mark in the area of the upper screw. the previous owner had taped the cover with black sealant.
 

thread can be deleted.

[Adjust ignition Dyna S - EFE]

That’s clear. But is it necessary to use this timing plate 

[Adjust ignition Dyna S - EFE]

the EF has no markings for F/T. how can i set the ignition?

[Adjust ignition Dyna S - EFE]

Hi,

i want to adjust a Dyna S in the efe. It’s a little bit different to a GSX.

the EFE works with the T Mark in the middle of the left connector

when I use now the ATU from the GSX is the T mark nearly on the top, but not in a line with the white marked stripe on the old ignition plate.

 

what is the correct way to adjust a Dyna S?

1: the stock atu with T mark to the middle of the left connector 

2. change the ATU (no Position change 

3. install the Dyna plate and adjust the connectors 

Is T the same like F ? I’m not sure that it works 

 

 

 

 

Thanks for help 

 

 

[Efe 'arm swap.]

I use exacty these parts.

i don’t want to fit the holder an the JMC. 
i need an good idea for a torque link near the axle maybe to fit it in the slotted area 

[Efe 'arm swap.]

so is. I wonder what the guy built before. before that I had the torgue arm

[Efe 'arm swap.]

Tighten nut 

[Efe 'arm swap.]

2 hours ago, Joseph said:

Whats the difference ? Do you have side to side pictures ? 

Enough to swing 

[Efe 'arm swap.]

Ahhh I understand !

ok mhhh 

I would not like to attach or weld something to the jmc
 

Maybe an option.. expensive option 

without anything. Only the hanger 

 

 

 

[Efe 'arm swap.]

2 hours ago, TonyGee said:

is it a solid one, looks like it to me !!!  if it is then you need to bolt the torque arm to the swingarm not the frame. 

Puuh and how looks the other one ?

[Efe 'arm swap.]

I use these one 

[Efe 'arm swap.]

So it is  

[Efe 'arm swap.]

I don’t have this main stand anymore 

[Efe 'arm swap.]

Efe with GSXR 1100 swingarm 

where can I fix the torque arm on my efe frame?

[fit an EFE stock footrest with GSXR swingarm?]

Of course, thats the easiest way. 

[fit an EFE stock footrest with GSXR swingarm?]

And the middle holder from the footrest? 

[fit an EFE stock footrest with GSXR swingarm?]

[fit an EFE stock footrest with GSXR swingarm?]

Hey,

its an Raask footrest on my EFE frame with GSXR swingarm, but i´m to tall for these footrest.

today I wanted to change my sport footrest for the stock footrest. But it will not fit. The left side is not so the problem. But its not possible the fit the right side, the swingarm is to wide.

How can I fit the stock footrest? What must I change?

 

Cheers from germany

[Hayabusa swing arm in EFE]

Hi guys,

I was asked by a friend today if I'm interested in his Hayabusa swingarm with wheel and accessories.

Has any of you installed a Haya swingarm in the EFE?

 

Best regards

[Katana build]

17 hours ago, scotgary said:

How much for the sprocket cover?  I'd like one too.

me too

[Rear Wheel swap GSXR 5,5 in EF swing arm]

I thought more of a technical drawing with dimensions to get one made. Unfortunately, I can not accept the dimensions of the stock brake caliper holder because the brake discs are different.

I am only concerned with the dimensions of the front as the distance from the axle to the holes for the brake calipers. And their distances among themselves

 

I need measurements for the red lines.

Thank you for your patience: p

 

 

 

 

[Rear Wheel swap GSXR 5,5 in EF swing arm]

I thought of something that looked almost like the standard one