[ELECTRICS FFS]

Sorted mine. Break in wire that gives the coil a live feed from starter switch. Could be worth a look at your loom.

[Finally i think its fixed]

If valve clearances are out of tolerance that can make it tap abit

[oil fittings]

As above. Good quality aswell

[ELECTRICS FFS]

I have exactly the same project and problem. Just ain't getting a spark. Could be cdi unit.

[Bleeding Clutch !!!]

They are a pain to bleed. I had same problem. Try back bleeding as already mentioned 

[B12 clutch push rod]

Thanks 

[B12 clutch push rod]

Can anyone tell me the length of a mk1 b12 clutch push rod please so I can make one up. Cheers 

[Slabby oil cooler thread sizes?]

M16 X 1.5

[Coils, whats the best choice?]

Dyna  coils are good but if it's a stock motor then I would just stick with stock coils. That's just my opinion tho

[gxsr slingshot cams]

I was told the gsxr 750 dot head cams are the best to use

[slabby 7/12]

Kokolis what do you mean by sockets???

[slabby 7/12]

Oh dear. Think I will get the b12 cdi/pick ups. Cheers 

[slabby 7/12]

Ah okay. Could a 1200 cdi be adapted to the 750 loom?? 

[slabby 7/12]

Hoping to yea

[slabby 7/12]

Hi. Putting a b12 motor in my 750 slabby frame. Just wondering if I can use the pick up out off the 750 motor and use in the 1200 so I can still use the cdi unit?? Tia

[1100 slabby running like crap]

Striped carbs and cleaned them. Also checked tap. Still running ruff. Any one know how to check coils??? 

[1100 slabby running like crap]

Thanks will give them another clean out along with the tap and balance. And yea they are standard 34mm carbs

 

[1100 slabby running like crap]

In need of some help people. My bike was running fine until the other day started running on 2 cylinders. Changed coils still no better. Checked carbs and cleaned them. Now it will run fine if I open the throttle gently if I crack it open then bogs down and misses. Any ideas?? Tia

[bandit cams]

Thanks everyone for all your info. At the moment the only mods are filters and exhaust. I will try my slabby cams in there and see what happens. 

[bandit cams]

Same, I'm doing a 7/12. I have a spare 750 slabby lump sat in the corner hoping I can use the cams from that. Sure someone will be along soon to give us the right info 

[bandit cams]

Anyone tell me the best cams to use on b12 engine apart from standard ones. Heard gsxr 1100 cams are a good upgrade. If so what year is best?? Tia