Hi Gents, got one off no problem, but the other is stuck.
Bought a tool from M&P but it didn't work, looks like I need a nut or bolt head on the end of a rod type tool.
Anybody done something similar or know where to buy one?
Ta
Just did that
I don't have impact so i recommend my way..
First i warmed the bottom bolt with (60-80W) soldering iron for about 20 minutes till all gets warm enough to loosen the loctite.
For the other end I got a M16 Nut and glued it to a 10mm socket (you can weld to 2 together), i used 3M Epoxy.
Than I recommend holding the bottom bolt with an Allen key and opening from the top with the wrench.
Good luck..
Actually I was surprised how easy It was this way.