Barney1982
-
Posts
64 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Barney1982
-
-
Yes that was the plan, I've seen a couple of water cooled 7/11 builds that did this with the 750 water oil cooler. It didn't mention what to do with the oil cooler feed lines from the sump. Would I need to make a link pipe across them or just block them off.
-
On 4/19/2023 at 4:07 PM, Barney1982 said:
Hi,
Long time project on the go and I have a question about the 750 water cooled heat exchanger swap for 1100 motor.
If I fit the 750 water oil cooler on the 1100 motor. Do I need the 750 sump or do I just block off the oil feed lines?
Anyone?
-
Hi,
Long time project on the go and I have a question about the 750 water cooled heat exchanger swap for 1100 motor.
If I fit the 750 water oil cooler on the 1100 motor. Do I need the 750 sump or do I just block off the oil feed lines?
-
Thanks for the help, it's definitely saved a few fuses
-
Hi, I'm looking for help with the wiring for the starter solenoid on a gsxr 1100w. I'm currently replacing the harness which seems pretty unmolested except for the wiring for the starter relay solenoid. The red plug has been cut off and replaced with spade connectors. Does anyone have a picture or know what wires go to what pins?
Water-cooled 7/11 build
in Water Cooled, V-Twins, Singles and 2-strokes
Posted
Awesome man, thanks for the help