Jump to content

Robski-123

Members
  • Posts

    7
  • Joined

  • Last visited

Posts posted by Robski-123

  1. Hello all, what would have caused this to the clutch plates, the bike had been sat for years before I got it, funnily enough it didn't run too bad, was notchy on gear changes though. Had to take the clutch apart to change the shift shaft.

    PXL_20220715_193524234.jpg

    PXL_20220715_193558213.MP.jpg

  2. Thanks,  just wanted to make sure, as I had read the clutch's are different between the Gsxr and Gsxf. So made think because of the oil capacities, the Gsxr might be shallower so might hit the clutch housing.

  3. Hi all,  Just needed some advice, as I have hair line cracks on my Clutch cover.  Was wondering If a Gsxr  1100 (1127),  cover would fit a Gsx F (1127). The only difference I could see was Gsx r one take 4 Litres of oil, stamped on the cover where as the Gsx F 4.3 Litres. 

    Thanks

  4. 26 minutes ago, wraith said:

    Welcome to OSS.

    EBC clutch kit NO NO NO NO just give me your money, it will have the same result, a non working clutch.

    Did the same mistake years back, it didn't even last 100 miles.

    OEM all the time. Go to Robinson's we get a discount 

     Thanks you saved me some money. Nearly ordered them, then thought I should double check.

    • Like 2
  5. Hi all, My clutch needs doing and was looking at the EBC clutch plate kit, just wanted to know peoples experience with them or point me in the directions of some good ones. Is it also worth using heavy duty clutch spring. Thanks

×
×
  • Create New...