Kimberkatana
-
Posts
50 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Kimberkatana
-
-
Cheers fella , that's why I love you lot ! A wealth of knowledge at the tip of my sausage fingers
-
Hi fella's just pondering some future jobs on the 1200 teapot project , if I fit a MK2 600 bandit sprocket cover ( to retain cable clutch ) can the Speedo sensor be used to run an aftermarket Speedo , Koso etc , is the wiring straight forward or a faff cheers for any insight
-
Wouldn't mind finding one of these ! Then persuading the house beast it'd be a good addition to the garage !!
-
Hi fella's , I'm getting bits together to put a dot head on a bandit 12 motor ( hopefully over the Xmas break) what's the best thing to do about camshafts, will aftermarket cams need better springs !! I've got the standard 12 cams and a set that I assume came out of the dot head but don't know for sure cheers
-
So next question is has anyone got base settings ( jet sizes etc ) to get it somewhere near to get started , as it's only my work s#####r it's never likely to see a Dyno , just as I've got the filters sitting on a shelf I'd quite like to use them
-
Hi guys just a quick one, has anyone used or tried the k&n kit on a 750 teapot ( the one that fits inside the airbox , with the bigger air intake hole ! ) I've got one in my spares pile and did fit it briefly when I first got the bike , but it ran like an absolute pig , but since proved the carbs weren't the best , any tips ? Cheers
-
Hi guys so my teapot daily is quite soft on the front end , I have fitted yss fork emulators when I did the seals n bushes but are there any upgrade springs that fit or is it just something from racetec , hyperpro etc cheers any advice appreciated
-
8 hours ago, Wagola said:
@KimberkatanaI would be interested in the spare DOT head you have. I'm in Peterborough so can't be too far away from each other as well.
No probs I'm in March so not to far I'll try and look at it Sunday n let u know if it's usable
-
Slightly different subject but what cam cover breather do I need to clear the frame cheers
-
I've got 2 dot heads , but the other one is on a wrecked motor I'll have a look and see if it's usable ! your welcome to it if it's any good
-
Cheers guys any advice greatly received
-
Hi guy's fairly new here so be gentle ! Just getting into a 7/12 teapot project, I've got a standard b12 engine and a spare dot head is it worth the time to change it over ( will need cams to suit was thinking Kent fast road/track) cheers for any help
-
1
-
-
Hi guys I'm new here so be gentle , bit of a long shot but I don't s'pose anyone has a solo seat cowl for a 90 gsx750f lurking in the depths of their man cave I could exchange beer tokens for ! Cheers in advance Andy
MK2 bandit Speedo sensor
in Oil Cooled
Posted
I'm putting a MK2 1200 bandit engine in a MK1 teapot but am thinking I want modern dash/clocks so already got drilled output shaft , was just thinking I could use Suzuki sensor instead of trying to mount aftermarket one