Ronaldo
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Ronaldo
-
-
11 minutes ago, Gixer1460 said:
How did you swop carbs around? Alternate rack or break the rack up and swap bodies around?
Surprised it ran at all swopping 1 and 2 leads around as it would make ignition 180 degrees out ! ! !
You can swop 1 and 4 or 2 and 3 - no other combinations are correct.
Sorry that’s not what I meant. Yes I’ve swopped the carbs around. And swopped the bodies around.
tried everything I can think of, I’ll have to do a compression test next.
12 minutes ago, Gixer1460 said:How did you swop carbs around? Alternate rack or break the rack up and swap bodies around?
Surprised it ran at all swopping 1 and 2 leads around as it would make ignition 180 degrees out ! ! !
You can swop 1 and 4 or 2 and 3 - no other combinations are correct.
-
That’s the one thing I haven’t done, a compression test.
-
Yep good spark on the plug.
-
5 minutes ago, NorthernBloke said:
Was it previously running on all 4, and when you say swapped carbs, you've used a completely different set?
Is the plug wet on the none running pot & have you swapped the plugs over as well.
It was running on all 4, then 3 now can’t get it to fire up on all 4 again. Swopped the carbs around not new ones, plug looks dry,
swopped plug leads around put 2 on 1 1 on 2 fired up but on the same 3.
-
Gsx1100et only running On 3 pots swopped leads, swopped carbs The carbs have been sonic cleaned.
any ideas please.
Gsx1100 et on 3 pots
in Air Cooled
Posted
Just hope it’s not a rebuild, think that’s beyond me.