TonyTumbleweed
-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by TonyTumbleweed
-
-
Evening... I have a GSXR 1100 J on the build ...does anyone know of someone still making a headstock to nose cone bracket in ally to suit a slabby... loads available for s-rads etc... have I missed the game by 10years?I have the OE frame/brace unit that holds the headlights etc but reluctant to chop it up to fit race kit.
thanks
-
Hi ... been looking for a while and searched but what advance retard unit do I need on a 1100 ef motor when fitting the Dyna S ignition ? Are only 1100 e/et/Es useable or anything else ? Cheers
-
Morning ... shabby discs are 5 hole ... efe 6 hole though .... same with the ZZR I think?
-
evening ... the Dymag is for the Efe ..standard 275mm discs do fit the wheel and bolt pattern... even has a speedo drive!
No problem if I have to have some made then will look into it. Haven't tried slabby. discs.. will have a look . cheers
-
Ok thanks Dezza ... I have a16" dymag to fit EF forks etc .. shame not to use really . That's all . Will fit 275s if it's a pain... just thought there might be 310s off something else that fits ok . Will find some thing I'm sure . Cheers
-
Evening ... I've been searching for a while now (3 months ) but is there anyone know of a 310-320 mm disc that will fit the 6 bolt pattern and the 55mm centres on a stock 1100Ef wheel ? Doesn't matter re offset as will make new calipers plates ... could have some carriers made but hoping there's something off the shelf maybe ? Cheers tony
-
Yep really odd ... if I put 30 mm spacers in above main spring then the flat washer then the adjuster/cap then all slack taken out of the fork leg travel.... I do remember taking some makeshift spacer tubes out when I stripped but presumed these were to stiffen the spring up ... no probs will keep a spacer in ... doesn't seem right though. The springs that were in originally are the same length as the new ones to clarify .
-
So suppose I’m asking is there any difference between EF springs and EFE springs as in length ? Don’t know which model the legs came off but ordered springs for the EF . Are EFE legs longer than EF !?!
-
Evening .. just rebuilding a set of standard Ef /. EFE forks ... I can put them all together all the bits , spacers etc there but seems to be @20 mm of compression before it actually starts to compress the main spring .. I have just bought new Hagon springs ... is there any internal differences between efe and ef ? These also have the small hole on the stanchions for the presumably balance pipe between legs ... am I missing something or is that how they are ! ?
cheers tony -
Can anyone tell me what part number that type of V&H exhaust is ? Can only find pro pipes 12002p for sale ... any thing else fit ? Cheers
-
evening ... I have standard arm in my ET but 18" 5.5" DYMAG classics. At the moment just ok with a 160 but close to the chain even with the front offset sprocket. No frame mods . 150 probably better choice next time for me. cheers Tony
-
1
-
Slabby cowling brackets
in Oil Cooled
Posted · Edited by TonyTumbleweed
Spelling
Evening .. anyone know differences in slabby 750 to 1100 are on the cowling brace … trying to fit a Fiberman fairing and looks like bottom bolt holder on the brace shouldn’t be there … are there height differences in 750 and 1100 cowls ? Cheers