Ghost
-
Posts
36 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Ghost
-
-
What should the compression be how think the ones I ordered where not much lower then that ????
-
-
Just looking at the placement of the manifold and turbo think I’m going to have to change the radiator turbo will be in the center of the v Ferin behind wheel going to be tight
-
Ok sounds good now I’m just waiting on pistons and rods to come in I figured stock bore but I have lower compression pistons coming I’d like to run like 8 to 10 pounds of boost my son is a small guy about 5.1 and does not weigh that much he will be running the bike for me as a typical dad I’m nervous about him raceing the bike
-
On 10/9/2019 at 3:48 PM, MeanBean49 said:
Will need the breather if the motors left stock i reckon
I’m going to use je stock bore maybe slightly lower compression
-
Any specific spots where would u put them crank case top of head where that breather is not sure where else
-
I was told I may have to make a breather crank case something to that affect I know in a car when built those I had to put a large breather in valve cover with catch can because of the boost lighten up the pressure in there
-
Nice . Looks pretty straight forward I’ll have to pick up some aluminum try marking one up I found a tdo5 for short money thank u for the picks point me in the rite direction now
-
1
-
-
Is the search function on this website if so can u point me in the direction
-
Looking for info on how to turbo my carbed say what now!? 750 w
-
I’m on the project site with this site I can take a look you will know y I want to boost I don’t have the knowledge to do so I teaching out to every one for help my bike is under the sit with hyabusa swing arm on a 95 750 frame ty
-
If there is any info that can help I would be thank full not sure where to get a plenum what I should use for a fuel pump I can make the manifold for turbo going to use a t28 turbo my son is going to run the bike for me I have a bad back so he will be the one to race it any help u can give ty
-
I was wondering where I can get or have a plenum made for a 95 Gsxr 750 it would help me out big time any and all I for parts fuel pump what should I use think I’m going to use like a t28 turbo my son is going to race the bike for me do to injury’s with my back thank u
-
-
Been thinking of trying to turbo my 95 ws down side is it’s carbed not efi is it possible any help would be great ty
-
I'm doing the same swap but on a 95 say what now!? 750 ws how did u set up ur rear brake should I use the bus a bracket and brake
Turbo a 95 say what now!? 750 that’s carbed
in Forced Induction
Posted
Wow that’s low it’s actually what I ran in 4 cyclinder wow ok ty