Physician
-
Posts
54 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Physician
-
-
That is a lot of dedication to race with those awesome bikes. Looks like a blast
-
I saw someone using slingshot/srad triples, with k4 forks and calipers using srad axle wheel and rotor and 4.5mm rotor spacers.
Its on youtube.
-
Some boils them in water. Dont know how much it last. I usually replaced with new ones, less fiddling and cracking..
-
Yes , dame types. Just take whatever jet# you need.
My old b12 had a gsxr1100 jet kit fitted with emulsion jets. Work ok to me
-
Last week was hot, i could feel the power lost between early morning and late afternoon on my work commute on my rf900. (Im in st-hyacinthe)
Warm the engine up and sync those carbs before fiddling more with mixture screw, you need them working together.
And did you inspect needle jets (emulsion tubes) while carbs were out ? Ovalised ones will fuck carb setups at low rpm/load
I think you also have a tps you can tune when carbs will be sync
-
It happened on my 1100f engine and my rf900.. (same fibre discs)
They probably sat for long and dried up.. were the bald sections all in the same direction?
I had to remove the pan to remove them all. In my case fibres pads jamed in the clutch basket and cause the clutch drag that had me opening it to inspect..
What a fun party between the copper washer of the oil pickup that fell 3 times and the rusted exhaust..
-
Thanks for the info!
-
1
-
-
I love the tail and colr touch in the louvers.
-
1
-
-
Awesome beast!
What are the valves you put in there? Customs?
-
Impressive. That is sv650 weight!
That is a tempting project
-
1
-
-
Thanks for the informations, i did not know these were stock.
I will have to take a look.
-
7 minutes ago, yann7/11r said:
Hi !
Take a look on previous post.
At page 4 you have the Egli drawing that inspired the MotoMartin brand birth. Lot of infos on this.
I missed it! 100mm back bone. I wonder how thick the tubes are.. probably quit thin like .75mm
How much does your complete bike weight?
I happen to have a spare 1127... and lot of parts...
-
What size tubing does it used ?
-
I really love this bike. Wish i had the time or money to get/build one!
These kind of frame are hard to come by in canada. Would have to build one..
-
1
-
-
I was looking for good carba that will be smaller on top than oem bs36 for my 1127 popup katana and came across these today. They are on a 86 750.. looks like mikuni RS? what are they exactly? Im not used to aftermarket carbs..
And will they do the job on my 1127? 750 usualle came with bigger carbs than 1127..
So good or bad? 500$ can for running carb with the engine..
-
Sorry for the noob question, are early k fork (00 to 03 1000) really better? I though they were similar in design
04+ would obviously allow radial caliper and i think slightly lighter with better damping (not that i would really notice it)
-
Is there a quick way to spot sp forks from standard blue ones?
-
Priority changes! New slide guides? Like brand new? If so, where did you find those?
-
Nice little project! Stock or modded?
-
How is it going? Any updates?
Did you have to mess with jetting going to the gsxr ti header?
-
So, hows the bike doing? Any updates?
-
750w cam add around 8 hp on top. Its common mod
-
Fyi 3 years ago i bought the correct friction discs for my 1100f , 9 thin (as gsxr) and 2 thickers from megazip. So they are still available.
-
Im doing a 1127 in a 750s3 this winter.. if anyone have drawings or dimensions i can give a dwf and dwg to have them done. Otherwise, i'll have some by christmass
bsr36ss Carb mixture ajustement confusion
in Oil Cooled
Posted
Exactly. The needle jet hol ovalised and it allow more fuel.
My 98 bandit did that. As soon as i change them it became smooth as it was suposed.
My current rf900 did that too.
You can buy them on megazip or other parts sellers. Last time i checked (2 years ago) i found 4 for about 140$ shiped (cad)
Factorypro also sells harder one that will last, but can wear the needle.