Bikemad
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Bikemad
-
-
Yes I did use standard steels.I had to use some mild abrasive on the steels as there were burnt marks on them.
-
Hi can you confirm you have 2 spring diaphragms. As mine has a standard suzuki diaphragm and a HD one as I was told to do this to cure problem.appreciate guys all the advice but I think I'm going to go with fat blokeonbandit.will see how much a genuine suzuki clutch will cost me from suzuki tomoz thanks
-
Oh as I ride the bike all year round. As it's my main transport as I doe do cars.oil is 10/40 semI synthetic.
-
Well this is the store. Brought bike 2yrs ago .engine was rebuilt by a guy who builds engines for dragster. It got high lift cams. Big bore kit and jetted.up.I can tell you this bike is a animal. When I had not long had it noticed the clutch slips in 3rd when the rev range it high.so I put HD spring along with sure flex clutch kit.then I put in motul semi sym the tic oil and this did the job.2 yrs on and I decided to change the oil and filter.high flow filter and same oil.since I did the oil change its off again same problem.I was told to put pure mineral oil in. So do you recommend put a genuine suzuki clutch plates and steels in.
-
Hi mine has a big bore kit and jetted.and I brought sure flex clutch plates.new HD spring .and now it's started slipping..
-
Thanks I aye to sure how to post in wot section.
-
Hi been looking for second hand parts to do this bandit clutch conversion. But had no luck finding one.if anyone comes across one plz let me know thanks
-
Hi just wondering if any one has experienced there bulbs keep blowing.I ride a mrk1 gsf 1200 bandit .I always ride with my head light on main beam and every 2/3 weeks it blows the high beam I then switch onto low beam and the same happens .any suggestions plz
-
Hi thanks have just looked at it..
-
-
Hi my bandit 1200 mrk1 has the crap type clutch fitted with the diaphragm spring clip. I need info on the suzuki gsxr 100 slingshot conversion on bandit.anyone done it.if so can some one tell me what I need to do the change plz.
Bandit mrk1 1200 clutch conversion from a gsxr 100 slingshot .need info
in Oil Cooled
Posted
Not sure of bhp.but no r1 can keep up with this off the mark.as it's been geared up to .