[Another fork swap !]

Turns out these forks are 54mm and the yokes are 55

Time to shim haah used a bit of can and it works perfect

The tl1000 wheel fits with the gsxr spindle so that's good 

 

 

[Another fork swap !]

Yeah he's a good lad. Had a chat with him before

[Another fork swap !]

Okay then folks 

I've just had my 600 bandit stem pressed into the TL1000 yokes after being knurled and there is about 2-3 mm still out of the bottoms is that normal or does it need more pressing 

Also I was told about it needing a shim at the top yoke which it does need but somebody said there is a bit in the bandit gearbox which works as the shim ? Anybody any idea on that one ? 

Also having some fork extenders made to make up for the 1 inch difference in fork sizes so wait and see those beauties

 

[Srad forks/bandit wheel]

Really wish I knew about this top yoke before buying my TL yokes

[Headlight ideas]

This is my one 

Cost me 100 off fleabay

Put in a.philips 130% brighter bulb and it's brill

 

[GSX1400 downpipes on GSF600]

Okay guys I'm new here so hello to you all for a start

I'm currently rebuilding a gsf600 with a few trick parts

I'm wanting to have 2 underslung exhaust under the rider pegs

I've been trying to find a cheap way of doing it but it seems pricey

Now I've found that that GSX1400 has a 4 into 2 system with what looks like the perfect angles

Has anybody ever tried it or seen it or can even suggest a cheap way of me doing this 

Thank you everyone