[Suzuki Gt500]

Hi I’ve an old Suzuki Gt500 . Just had the frame plastic coated and cannot remember where the E11 sticker goes ?

[Gsxr1100 v Bandit 1200]

Brill , thanks for advice . Don't think I need the extra top end , rather boost the midrange .

[Gsxr1100 v Bandit 1200]

Hi I've got a low mileage (3000mls), Bandit 1200 engine and wondered if it's worth putting Gsxr1100 cams in it . Will it make much difference to the performance ?

[Gsxr1100 with SSSA]

Hi thanks for info . Doesn't the 6 in wheel  fit the SSSA ?

[Gsxr1100 with SSSA]

Hi does anyone know if the Triumph SSSA drive hub will fit a Gurls blouse Vfr800 swinging arm.

inwould like to fit the Triumph rear wheel as it's similar in style to the GSXRs front wheel.

pete

[Gsxr1100 single sided swinging arm swop]

Hi I'm sure this has been raised before , but I wonder if anyone who has fitted the Gurls blouse vfr750 swinging arm can give me some advice.

thr pivot adjuster on the Gurls blouse swinging arm is on opposite side to the Gsxr1100 , how did you get over it . Also the shock is out of line with the Suzuki shock mounting , how was this overcome?

cheers

pete

[Gsxr750w]

Hi, I've got a Gsxr750w that makes a clanking type noise when started from cold . ( seems to come from left side as you sit on bike ).

Noise goes up and down with revs .

However once run for a couple of mins noise disappears.

Bike runs a treat , other than a very light bit os smoke on one cylinder which I've been told I'd valve guide seals .

Any ideas on noise ?

[Gsxr750w]

Hi thanks for the info. A bit to mull over.

[Gsxr750w]

Hi I've got a Suzuki GSXR750wp that's smoking badly. However I've also got a low mileage bandit 1200 engine.

Will the 1200 engine fit into the gsxr750wp frame ?

Cheers for help