MooreMatthew Posted October 28, 2018 Share Posted October 28, 2018 I’ve both sets of carbs but been told that factory pro do conversion for the 38mm 750 carbs to suit 1127 Or use the 40mm that are from the 1127 motor originally which has people used they will be fitted to a slabby project so will end up having to run filters for them to fit anyone got pics of what filters there running in slabby frames Thanks Quote Link to comment
Oilyspanner Posted October 29, 2018 Share Posted October 29, 2018 If you're going to use filters the 38's will be better - the 40's need an airbox to work well, you get dips in the delivery without the airbox, I tried for a while with the Factory kit. The 40's work really well with the airbox and free flowing filter, then jetted to suit. The 38's work well with or without an airbox, still need to put a bit of work in to make them work nicely, but it's far easier. Quote Link to comment
nopokewithoutsmoke Posted October 29, 2018 Share Posted October 29, 2018 I wouldn't use Pipercross - many years ago I took a 38mm carbed 1052 to the dyno...to cut a long story short, swapping the new Pipercross filters for some 'slightly squashed to fit 'K and N's' that I had spare gained 5hp at peak. Quote Link to comment
Jaydee Posted October 29, 2018 Share Posted October 29, 2018 4 hours ago, nopokewithoutsmoke said: I wouldn't use Pipercross - many years ago I took a 38mm carbed 1052 to the dyno...to cut a long story short, swapping the new Pipercross filters for some 'slightly squashed to fit 'K and N's' that I had spare gained 5hp at peak. I wouldn't class that as a reason not use pipercross. The installed jetting might have been better suited to a slightly less air flowing filter. As dyno time is expensive, it's quicker to swap filters to suit jetting than changing jets to suit filters. But that doesn't mean you can't get more bhp from the pipercross with suitable jetting. 1 Quote Link to comment
wraith Posted October 29, 2018 Share Posted October 29, 2018 I'd go for the 38mm carbs all day, the 40mm I've heard are a real pain to set up, if you ever can get them to run right. I've get a set of 38mm on my bike (1127) and they did not take to much to set up. The 38mm gives you good top end with good power all the way through the rev range, the 40mm from what I'm told are good for top end but shit for anything else. Someone will tell me that's not right 2 Quote Link to comment
nopokewithoutsmoke Posted October 29, 2018 Share Posted October 29, 2018 35 minutes ago, Jaydee said: I wouldn't class that as a reason not use pipercross. The installed jetting might have been better suited to a slightly less air flowing filter. As dyno time is expensive, it's quicker to swap filters to suit jetting than changing jets to suit filters. But that doesn't mean you can't get more bhp from the pipercross with suitable jetting. Fair comment about the jetting, but the Pipercross filters were the first thing Russ at Torque Tune, Ollerton commented on before he put the bike on the dyno. Quote Link to comment
MooreMatthew Posted October 29, 2018 Author Share Posted October 29, 2018 47 minutes ago, wraith said: I'd go for the 38mm carbs all day, the 40mm I've heard are a real pain to set up, if you ever can get them to run right. I've get a set of 38mm on my bike (1127) and they did not take to much to set up. The 38mm gives you good top end with good power all the way through the rev range, the 40mm from what I'm told are good for top end but shit for anything else. Someone will tell me that's not right Did you also use the factory pro kit or did you just take it to dyno and let them set it up looks like it will have the 38mm ill keep the 40mm for my Slingshot that will have the airbox on as the ones I’ve got with that are seized so can sort them at a later date Quote Link to comment
wraith Posted October 29, 2018 Share Posted October 29, 2018 I put b12 pilot jets in them and then contacted Dyna and got them to send me a Dyno jet kit. pilots set at 2 1/2 turns out. 150 main jets. I think I set the needles in the third groove. running with K&N filters, gsxr1000k2 down pipes with open can. runs clean all the way through the rev range and just keeps pulling, till my neck can't take anymore Never had it in a Dyno as it's running well so never needed too and I know how big my dick is so don't need to brag 2 Quote Link to comment
manden Posted November 2, 2018 Share Posted November 2, 2018 On 10/29/2018 at 8:49 PM, wraith said: I put b12 pilot jets in them and then contacted Dyna and got them to send me a Dyno jet kit. pilots set at 2 1/2 turns out. 150 main jets. I think I set the needles in the third groove. running with K&N filters, gsxr1000k2 down pipes with open can. runs clean all the way through the rev range and just keeps pulling, till my neck can't take anymore Never had it in a Dyno as it's running well so never needed too and I know how big my dick is so don't need to brag 40 mains? Quote Link to comment
wraith Posted November 2, 2018 Share Posted November 2, 2018 1 hour ago, manden said: 40 mains? ???????????????????????? Quote Link to comment
Askamaskinservice Posted November 2, 2018 Share Posted November 2, 2018 46 minutes ago, wraith said: ???????????????????????? 2 hours ago, manden said: 40 mains? 38mm 1 Quote Link to comment
wraith Posted November 2, 2018 Share Posted November 2, 2018 On 10/29/2018 at 6:45 PM, wraith said: I'd go for the 38mm carbs all day, the 40mm I've heard are a real pain to set up, if you ever can get them to run right. I've get a set of 38mm on my bike (1127) and they did not take to much to set up. The 38mm gives you good top end with good power all the way through the rev range, the 40mm from what I'm told are good for top end but shit for anything else. Someone will tell me that's not right Quote Link to comment
manden Posted November 3, 2018 Share Posted November 3, 2018 The 40mm seems to drag really bad from the slow jet Quote Link to comment
manden Posted November 3, 2018 Share Posted November 3, 2018 On 11/2/2018 at 5:42 PM, wraith said: ???????????????????????? Main jets. What size? Quote Link to comment
Rossco(Iceman Josros) Posted November 3, 2018 Share Posted November 3, 2018 On 10/29/2018 at 7:49 PM, wraith said: I put b12 pilot jets in them and then contacted Dyna and got them to send me a Dyno jet kit. pilots set at 2 1/2 turns out. 150 main jets. I think I set the needles in the third groove. running with K&N filters, gsxr1000k2 down pipes with open can. runs clean all the way through the rev range and just keeps pulling, till my neck can't take anymore Never had it in a Dyno as it's running well so never needed too and I know how big my dick is so don't need to brag @wraith do you have a pic of your exhaust set up ??? Quote Link to comment
Rossco(Iceman Josros) Posted November 3, 2018 Share Posted November 3, 2018 On 10/29/2018 at 12:49 PM, Blue said: Ramair’s on my 38’s Blue did you have any clearance issues with the 38’s in the 750 frame ??? Quote Link to comment
wraith Posted November 3, 2018 Share Posted November 3, 2018 1 hour ago, Rossco(Iceman Josros) said: @wraith do you have a pic of your exhaust set up ??? not got one with the belly pan off, but it's a 4-2-1 1 Quote Link to comment
wraith Posted November 3, 2018 Share Posted November 3, 2018 4 hours ago, manden said: Main jets. What size? As posted. Quote Link to comment
Rossco(Iceman Josros) Posted November 3, 2018 Share Posted November 3, 2018 8 minutes ago, wraith said: not got one with the belly pan off, but it's a 4-2-1 What’s it look alike with the belly pan off ??? Quote Link to comment
wraith Posted November 4, 2018 Share Posted November 4, 2018 12 hours ago, Rossco(Iceman Josros) said: What’s it look alike with the belly pan off ??? Have a look at my gsx1157et project same zorst fitted to a b12 motor in a ET frame and with no belly pan, as like I said above I HAVE NO PICS OF THE KAT WITH OUT THE BELLY PAN. Quote Link to comment
Rossco(Iceman Josros) Posted November 4, 2018 Share Posted November 4, 2018 1 hour ago, wraith said: Have a look at my gsx1157et project same zorst fitted to a b12 motor in a ET frame and with no belly pan, as like I said above I HAVE NO PICS OF THE KAT WITH OUT THE BELLY PAN. Not got my reading glasses on Quote Link to comment
Blue Posted November 4, 2018 Share Posted November 4, 2018 23 hours ago, Rossco(Iceman Josros) said: Blue did you have any clearance issues with the 38’s in the 750 frame ??? No, I also don’t have the original battery box Quote Link to comment
Rossco(Iceman Josros) Posted November 4, 2018 Share Posted November 4, 2018 2 hours ago, Blue said: No, I also don’t have the original battery box Any pics @Blue Quote Link to comment
Blue Posted November 4, 2018 Share Posted November 4, 2018 1 hour ago, Rossco(Iceman Josros) said: Any pics @Blue any more than what’s in there let me know Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.