Jump to content

GSXR1100WV Brand new clutch - Still slipping?


Recommended Posts

Hi guys,

I've just replaced the clutch with new oem.

New parts include:

  • Main clutch disk set (pn:2140040C01)
  • 1x smaller clutch friction disk (pn:2144246E00)
  • 1x tapered spring washer (pn:0916400007)
  • 1x clutch pressure hub (pn:2146240C02) (old one was chewed up pretty bad)
  • 1x thrust bearing (pn:0926315003)

I'm guessing I might also need to change the clutch sleeve hub (pn:2141046E00) I'm guessing its probably glazed over. I didn't notice that it was chewed up, just mirror smooth. Would it be worth going at it with some 400/600 grit sandpaper? or bin in? Unfortunately its a $200 part :(

After writing this... I've just realised I may have thrown out the clutch spring washer with the old pressure plate (pn:2162340C00)... Which is in the bin... and bin collection day... and now its gone... crap!

Edited by KoroKoro
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...