Jump to content

non starter


philwright

Recommended Posts

For carbs deep cleaning I use Trichloroetilen bath , just leave carbs for hour or two fully immersed in that metal bath and after is removed it will be like brand new , inside and outside , after that only compresed air is needed for dryin out ,

Problem is that Every Plastic or Rubber piece have to be removed from carbs before that very agresive chemical bath or will be totaly Resolved and Destroyed ! 

Link to comment

Carbs have now gone for ultrasonic cleaning, I removed all jets, emulsion tubes,white plastic slide housings, slides ,diaphragms and O rings, i also unscrewed and removed the pilot/mixture screws after making an accurate note that they were all screwed out 1 and a quarter turns, I've ordered new quality fuel pipe and a pair of inline filters...looking forward to getting it all back together ,in some ways I wish i'd not touched em in the first place!

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...