Jump to content

Recommended Posts

3 hours ago, vizman said:

@Havocis attempting something with his dr

I'm using Talon hubs and rims originally on an XR600 back in the 90s. The hubs were in production from 93 until 2002.

20180626_174744.thumb.jpg.a497052daab13fed4a86f329e2b6163b.jpg

The bearing are the wrong size so spacers required.

IMG_20180728_154111.thumb.jpg.3a6d7682e0e1e76532975d93621e6f25.jpg

The disk is massive on the front and I'm using a Harrison Billet 6 caliper so new hanger being made. Viz's way is loads easier but I had the wheels...IMG_20180731_152352.thumb.jpg.c7a5ec17c6941f818db76417973f6a62.jpg

:)

  • Like 2
Link to comment
  • 2 weeks later...
On 10/5/2018 at 5:10 AM, jimbob43 said:

Getting new rims laced to the hubs sounds like a plan, what rims are you using

Don't know, I suspect Borrani but they were pretty rough before I had them powder coated. Accel rims from a DRZ400SM would be as good as any..

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...