Jump to content

83 kat running gear swaps.


Wurz

Recommended Posts

stock kat swingarm will take upto a 180 tyre with no serious mods, so if youre after fitting a wider rear you dont necessarily need to swap the arm. lucky7 sell the mounts to weld onto a stock bandit arm to change it to twin shock, and you can get a discount on them by ordering them through this site.

Link to comment
29 minutes ago, johnr said:

stock kat swingarm will take upto a 180 tyre with no serious mods, so if youre after fitting a wider rear you dont necessarily need to swap the arm. lucky7 sell the mounts to weld onto a stock bandit arm to change it to twin shock, and you can get a discount on them by ordering them through this site.

What mods john?  Spacers, cush drive torque arm I take it

Link to comment

Using the standard swing arm it is all about spacers, and machining the sprocket carrier face to get chain run clearance. You'll also have to step the front sprocket out. Torque arm needs a bend too.

Bandit swing arm and rear wheel combo with the Lucky 7 weld on shock mounts ( see the traders section) is a tried and tested mod.

What to you want to do with the front? RWU or USD?

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...