Davektm Posted July 15, 2018 Share Posted July 15, 2018 I'm struggling to find a decent 4 into 1 for my 1100W, does anyone know if exhausts from other models fit as I don't want a 900 quid akrapovic or the standard pipe. Any suggestions welcome Quote Link to comment
Madb Posted July 15, 2018 Share Posted July 15, 2018 https://www.Eblag.co.uk/itm/93-94-95-96-97-98-GSXR1100-YOSHIMURA-EXHAUST-PIPE-MUFFLER-SLIP-ON-CAN-W-MIDPIPE/263777639943?hash=item3d6a5f5e07:g:mR8AAOSwh1NbL~yk just the end with link pipe. have you tried black widow for the down pipes? 01234 871009 Quote Link to comment
Duckndive Posted July 15, 2018 Share Posted July 15, 2018 (edited) 20 hours ago, Davektm said: I'm struggling to find a decent 4 into 1 for my 1100W, does anyone know if exhausts from other models fit as I don't want a 900 quid akrapovic or the standard pipe. Any suggestions welcome As long as the headers are not welded to the collector then most aftermarket oil boiler ones will fit. Edited July 16, 2018 by Duckndive Quote Link to comment
Madb Posted July 15, 2018 Share Posted July 15, 2018 there is a set on Eblag now for a 1100 boiler. https://www.Eblag.co.uk/itm/suzuki-gsxr1100-88-91-full-laser-exhaust-system-slingshot/163134902022?hash=item25fb990f06:g:4vgAAOSwSCZbPgby Quote Link to comment
Davektm Posted July 16, 2018 Author Share Posted July 16, 2018 Ok that's cool, I was told a slingshot system wouldn't fit though Quote Link to comment
vizman Posted July 16, 2018 Share Posted July 16, 2018 i've fitted gsxr k1 titanium headers to my rf900 Quote Link to comment
Duckndive Posted July 16, 2018 Share Posted July 16, 2018 1 hour ago, Davektm said: Ok that's cool, I was told a slingshot system wouldn't fit though if the headers are welded into the collector you will have to force them into the ports "as the port spacing is different" most aftermarket "Micron ,Yoshi, Akrapovic etc" have separate pipes that are retained by Springs's so easier to adjust to the different port spacing off the water boiler .... my guess on the gsxr thou headers is that the centres are the same as the water boiler.....as when I fitted a set to a oil boiler I had to bar them into the ports Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.