Blue Posted June 22, 2017 Share Posted June 22, 2017 What fittings would I need to sort my oil cooler hoses out? AN-8? 35 or 45 deg? Quote Link to comment
dupersunc Posted June 22, 2017 Share Posted June 22, 2017 They look like 1/2 "bsp but the extra dowety washer on the sump fitting is throwing me. Quote Link to comment
Blue Posted June 22, 2017 Author Share Posted June 22, 2017 I want to get rid of this lot & start again Quote Link to comment
SiBag Posted June 23, 2017 Share Posted June 23, 2017 I'm Using an M16 to AN8 adapter out of the sump and then AN8 45Deg swivel fitting from that. I made my own lines up from bits off eBlag.. I know some run AN10, but that seems a bit overkill to me. Quote Link to comment
SBK1000 Posted September 4, 2017 Share Posted September 4, 2017 That close to the exhaust... No bueno! Quote Link to comment
fatblokeonbandit Posted September 4, 2017 Share Posted September 4, 2017 -8 for me, always make my own, easy peasy and so cheap Quote Link to comment
SiBag Posted September 5, 2017 Share Posted September 5, 2017 On a side note @fatblokeonbandit where did you get the brackets to fit radial callipers to standard forks. Quote Link to comment
fatblokeonbandit Posted September 5, 2017 Share Posted September 5, 2017 (edited) Got them many years ago from a bloke in Taiwan, they are on ebog still!! put radial caliper adaptors in the search bit Edited September 5, 2017 by fatblokeonbandit 1 Quote Link to comment
Danm54 Posted September 5, 2017 Share Posted September 5, 2017 I know its watercooled but same kind of thing, used straight adaptors on the sump to an8 fittings. Adaptors to the standard oil cooler were a nice find as well. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.