Jump to content

Wheelie Kid


Recommended Posts

After borrowing other ther peoples bikes to compete in the 2014 World Wheelie Competition I thought it was about time that I pulled my finger out and got my own.

18.8.14 

The day after the wheelie competition I sourced a local bike. A 13 owner K model Gsxr1100. "Just needs a clean mate" he blurbed on the phone a bit more and declared the asking price of £1000

As with most used bikes of this era it resembled nothing of the advert that lured me in.

£500 later and I'm drinking beer looking at it on the back of the trailer outside the pub knowing that Iv just commuted myself to debt and social exclusion. Again.

 

image.thumb.jpg.cf0e644648240ab59b88ec48

The idea?

A "cheap turbo Gsxr". People laughed. I now know why.

Honestly. The bike sat in the garden for a few months and I did nothing with it, I stole the gearbox from it to give life back into the EFE to enable me to race at Santa Pod in October. Ok, now Iv had to remove the engine to liberate parts from it I suppose I might as well start building this thing..

image.thumb.jpg.d4a598c8c9e08edaa7885adc

image.thumb.jpg.c9b6f1e1080abe5abbf14d91

They come apart so easy...

 

 I through a leg over the Busa and collected the barrels from the engineers and opened my wallet for the first time, an exercise that has become a lot more frequent lately..

image.thumb.jpg.d04e26fcf65d40d327cc83ee

Iv spent money on it now so Im in it for the long haul. 

Mates rates (free, we like free) Soda Blasting on the engine.

image.thumb.jpg.6381fdd37ea83361d6790027

Let's skip forward a few months of scraping 26 years of crud off the engine and spending stupid amounts of money on a £500 motorcycle. 

Engine Spec:

Re Shelled crank

Hayabusa Gen1 rods and pistons

1216cc 81mm bore

Refurbished gearbox 

Refurbished cylinder head

Bandit cams with APE adjustable sprockets

DID HD cam chain and APE CAM chain tensioner

All new seals and gaskets 

Finished in VHT gloss black

sounds easy huh

image.thumb.jpg.206046176cb4f6bbe2a86e93

Forgot about the chassis... 

Il just do the engine I said to my dad. With that complete I thought I was on a winner... Dad wheeled in the Karcas from the garden said engine had been extracted from. No way way I going to be using this bike in its current condition. 

Down to the frame for a degrease and polish. 

With the Metchamehemexxxmex rear swingarm sold as it was too long for the job a 750K swinger was sourced.

New bearings all round and a rebuild of the forks it started looking like a bike again. 

image.thumb.jpg.88d4da18db6fbe99d4a8fa03

The rear wheel was swapped from the standard 4.5" to the later 5.5" to give a bit more contact. Powercoat and new shoes later it's starting to veer off the "Cheap turbo bike" idea I had in my head.

 

image.thumb.jpg.7c17eb825267ece9a612059d

After learning that the original shock was knackered it was back to eating beans on cardboard for another month. Maxton the local suspensions gurus up in thems there hills commissioned a one off shock built for me to my weight (Oi!) and requirments. 

image.thumb.jpg.dbbfce49671117b2d1495095

For the front. New genuine bushes seals and oil were purchased, let's face it the front won't be doing much mileage..

image.thumb.jpg.dbbb6f2175ae1dbb0c626e3a

New seals, pads, Ti Disc bolts etc on the front cleans everything up

(it's still a cheap turbo bike.mum)

image.thumb.jpg.0ce6a5cd758b9ba965db8628

Billet top yoke and renthals on loan from Dodge from the original Record Holding Egg built "Plumbers Turbo" 

Refit of the bodywork made all the hard work look rather tatty and that just won't do ;) 

image.thumb.jpg.9bcdf24c02cd056d2f166880

Strong like Bull 

Good on Plough

image.thumb.jpg.af4ed7c3a7bad1d67d18614e

Paying a friend in beer we got the motor in using stainless engine bolts

image.thumb.jpg.0200405cde39c9bced832608

Paint had begun with a pearl white base. Id asked for a new take on the original slingshot colours with a little extra thrown in and the obligatory oss logos airbrushed in.

DA46F88D-E119-4D23-9469-3BFB83CD59D5_zps

 

932269F2-9EB0-4B0D-A2B7-0430045B690B_zps

333E904A-D49E-4EA8-888B-5C62776A38A1_zps

01F06097-D4E8-4806-ACCE-6DCFFDDD8DDC_zps

 

Now with more lunch money saved it was ready to be sectioned at the FBM house of pain....

In the few weeks that my bike was at Dave Dunlop's things started to get very real very quick that this bike was actually going to be and there was a chance i might be able to make it to the wheelie competition! Dave and Sam took me in and let me stay a few days here and there so i could help (interfere and slow down) with work on the bike. Alot of you may see Daves pictures on his facebook page of silliness and banter but it is far from it! FBM is a family name for the Dunlops as they all seem to play there own role in creating these turbo bikes, so much goes on behind the scenes to get these bikes churned out. The man doesnt stop... hes a nightmare to get going but after a coffee n a fag the man is unstoppable until the small hours of the day. In-between working on my bike i seen him fabricate other kits, build numerous engines, tune bikes, deal with customers queries every day, day in day out. After seeing what goes on at FBM world headquarters i can vouch that youll be in good hands.

so the pipe work started...

5BFEFD52-685F-4445-8FF4-161F7C5249AF_zps

CD76919E-468D-47C5-BC18-D13D0E04B5DC_zps

64BC0D3D-BF28-404E-BCA5-1BACB6D2EFB3_zps

2DA1C9F4-4F33-44EF-90E5-3BB613868D10_zps

9C183870-D7E3-451F-B37D-0E99E813486D_zps

84D9E7C5-2116-44EB-990D-7A23699AA1A1_zps

4FF96682-5F16-4141-92AA-4DE4EF57418B_zps

48E11ADE-C819-47F3-AAAF-A4CFCA36AF82_zps

ABE06B54-FAC6-4BF4-8F34-24DC7E34535B_zps

 

The bike started to come together with only days to go before the bike was due to be collect for transportation to Elvington. It actually came down to the night before..

Untested the bike was as complete it was ever going to be in time for the World Wheelie Competition.

87987B47-E054-498E-96B7-1BD88895319F_zps

C8A547DC-1AE3-434B-9041-D635D3514E76_zps

I drove the bike from Daves to Elvington arriving at 11:30pm Thankfully Matt Butler and Zepp helped me assemble the awning etc making us look at right posh

AC408326-2DE6-4E2A-8B93-DA39AFACB130_zps

Me and Zepp stayed up until 2am to ensure the bike would pass for tech inspection the next morning.

9D3FE585-7F3F-42F1-9F64-E4A12E5AD4CA_zps

 

The bike unfortunately had some running issues with the bike being untested, no drive through the clutch all Saturday due to an incorrect stack height and air gap meant a brand new Suzuki clutch pack was turned a lovely shade of blue...

This didn't dampen our spirits and we still partied with the best of them. Phil Wood drove from North Wales the Saturday evening to set the clutch up correctly, a quick spin up the return road confirmed i now had Drive! it really wanted to wheelie now and we all got our heads down excited for the next day.

60A5E37E-B74E-4DAB-ADAF-36451E3A6CE0_zps

 

First out on track on Sunday. I started the run and all seemed well and out of nowhere the bike cut out(like someone just turned the key off) 3/4 the way into a kilometer wheelie. :(

That fault would then haunt us for the rest of the day. So. a full Kilometer wheelie wasn't meant to be but we give it a damn good Go!  Changes have since been made to the bike and we hope to have the bike doing Kilo's on every outing.

The event organizers awarded me a trophy for the most dedication of 2015  for building a competition bike within a year. That trophy is for everyone who helped me out, you know who you are!

Thanks for reading my babble. I shall add extra photos for dramatic value.

97A924C2-02AF-4516-B122-5AC50E1702D1_zps

BCD83E04-F831-4F06-98D5-C62144C350E5_zps

CC48C02B-BD9C-4CA6-B988-6AE83A0E29B9_zps

93414B1E-AF04-494C-9B4F-794D215BAC91_zps

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edited by Kid Kearsley
updates
  • Like 10
Link to comment
  • 3 weeks later...
  • 2 weeks later...

It was fucked. Every part seemed to need replacing or restoring. 

Ive bought plenty of 20+ year old bikes i've grown to expect the unexpected and I still keep buying them, we had it in the unit for months when he had a little wobble in the Deva and he still wouldn't sell it me xDxDxD

Link to comment
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...