ET steering lock

[Simbec1863]

Does anyone with a 750 or 1100 ET frame know if there should be a recess or lugs on the top of the steerer tube for the steering lock to lock onto/into?

My lock works but I wonder if the lugs or recess have been removed by previous owner before it was powder coated.

tried looking online but non of the diagrams of the frame show this detail,all help or pics appreciated 

 

[Wilf]

Hiya dude, just had a quick look at mine whilst the tank is off. Above the frame number and slightly anti-clockwise is a lug probably 25mm x 3mm.

will try to get a photo when it's light, hope this helps

[Simbec1863]

13 minutes ago, Wilf said:

Hiya dude, just had a quick look at mine whilst the tank is off. Above the frame number and slightly anti-clockwise is a lug probably 25mm x 3mm.

will try to get a photo when it's light, hope this helps

Cheers Wilf thanks for this

[Simbec1863]

On 21/03/2017 at 10:13 PM, Wilf said:

Hiya dude, just had a quick look at mine whilst the tank is off. Above the frame number and slightly anti-clockwise is a lug probably 25mm x 3mm.

will try to get a photo when it's light, hope this helps

Any luck with the photo yet mate?

[Wilf]

Sorry dude forgot to get them next day . Anyway , it's tricky to get a decent shot but I've tried to show from both sides. 

[Simbec1863]

Thanks mate just the job this answers my question cheers

[Wilf]

No worries, glad it helped.

[mick-ne]

[mick-ne]

My frame is bare so theres a good shot of mine if it helps

[Simbec1863]

13 minutes ago, mick-ne said:

My frame is bare so theres a good shot of mine if it helps

Cheers Mick, can't see a picture though??

[jameskat]

Its in the katana post.

[mick-ne]

I need my sausage fingers cutting off just posted in the thread above lol

[Simbec1863]

Nice one mate.

Mines deffo been removed by previous owner before powder coating, oh well