Jump to content

show us your plenum


Recommended Posts

3 minutes ago, Gixer1460 said:

Using the above picture for reference - once the carbs are removed and the plenum takes their place, it should be no where near the frame so nothing needs 'notching' ! There is loads of space. . . . . whether you can get the turbo into the space behind is another matter. The TB can be located almost anywhere as its only moving air - injectors in the plenum - job done!

The Mr Turbo Kits require notching for the exhaust and the carb in a Slabbie 1100.   Mate built this, and I'm sure he had to cut the frame both sides to clear the turbo and tail pipe. Not to say the Plenum and turbo couldn't be packaged to avoid it.

Image may contain: motorcycle

Link to comment

But isn't this a bespoke install so shouldn't have to cut a frame to fit a kit - rather make kit fit the frame? Whilst an HSR (as fitted above ) is a good carb, Mr Turbo kits usually developed using S&S carbs which were considerably shorter so clearing the frame? I'd even consider turning the TB through 90 deg. to face backwards and fit under the seat?

  • Like 3
Link to comment
  • 2 months later...
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...