370steve Posted June 26, 2021 Share Posted June 26, 2021 1 hour ago, clivegto said: Me too bud. welcome to my world 1 Quote Link to comment
clivegto Posted July 4, 2021 Share Posted July 4, 2021 Knocked a couple of spacors up for the back indicators. 3 Quote Link to comment
clivegto Posted July 4, 2021 Share Posted July 4, 2021 Had a bit of a rethink and made a longer version to stick out past a legal number plate. 2 Quote Link to comment
clivegto Posted July 5, 2021 Share Posted July 5, 2021 So I sleeved the indicator stem up, think it looks better like this obviously it will be painted black. 3 Quote Link to comment
clivegto Posted July 6, 2021 Share Posted July 6, 2021 Made another for the other side and covered them with heat shrink. 4 Quote Link to comment
GeorgeEI7KO Posted July 6, 2021 Share Posted July 6, 2021 On 6/26/2021 at 9:15 AM, clivegto said: Me too bud. not me, i luvs it. Being an Electronic nerd does help tho I suppose... Quote Link to comment
clivegto Posted July 6, 2021 Share Posted July 6, 2021 1 hour ago, GeorgeEI7KO said: not me, i luvs it. Being an Electronic nerd does help tho I suppose... If you happen to be visiting North Yorkshire in the next few weeks please feel free to call in to give me a hand with the loom. 1 Quote Link to comment
GeorgeEI7KO Posted July 6, 2021 Share Posted July 6, 2021 1 hour ago, clivegto said: If you happen to be visiting North Yorkshire in the next few weeks please feel free to call in to give me a hand with the loom. Highly unlikely Clive. It you were closer I'd do it no bothers Quote Link to comment
clivegto Posted July 6, 2021 Share Posted July 6, 2021 32 minutes ago, GeorgeEI7KO said: Highly unlikely Clive. It you were closer I'd do it no bothers Cheers man. Quote Link to comment
370steve Posted July 7, 2021 Share Posted July 7, 2021 15 hours ago, clivegto said: Made another for the other side and covered them with heat shrink. very similar solution to yours mate 1 Quote Link to comment
clivegto Posted July 7, 2021 Share Posted July 7, 2021 1 hour ago, 370steve said: very similar solution to yours mate Have noticed the indicators need to point in the right direction even though at a glance its not noticeable. 1 Quote Link to comment
Nelson Posted July 7, 2021 Share Posted July 7, 2021 Did you go blind for a bit after your first glance ? They are mega-bright. Fantastic build clivegto ! Quote Link to comment
clivegto Posted July 7, 2021 Share Posted July 7, 2021 2 minutes ago, Nelson said: Did you go blind for a bit after your first glance ? They are mega-bright. Fantastic build clivegto ! Thanks and yes I did. Quote Link to comment
clivegto Posted July 11, 2021 Share Posted July 11, 2021 Now have a working back light, horn, indicators and clock face. Wired the fuel pump into the kill switch. Still lots to chop out and shorten. 3 Quote Link to comment
clivegto Posted July 12, 2021 Share Posted July 12, 2021 It see's. Although the battery is flat. 2 Quote Link to comment
TonyGee Posted July 12, 2021 Share Posted July 12, 2021 nice job Clive but i think your work space needs a tidy 1 Quote Link to comment
clivegto Posted July 12, 2021 Share Posted July 12, 2021 (edited) 6 minutes ago, TonyGee said: nice job Clive but i think your work space needs a tidy It is fairly tidy to what it is sometimes Edited July 12, 2021 by clivegto 5 Quote Link to comment
clivegto Posted July 19, 2021 Share Posted July 19, 2021 (edited) Made a little bracket to hold the horn on. No front brake light switch on the brembo master cylinder so got a m10x1 double banjo pressure bolt. Fitted it rebled the system then one of the dowty washers let go squirting brake fluid over the clocks and lights fitted some copper washers the rebled it again. Fitted a back brake line from my stash and bled that through, although it did take 24 hours to let the air rise out of the system got most of the wiring working now but all needs tidying up. Edited July 19, 2021 by clivegto 3 Quote Link to comment
clivegto Posted July 20, 2021 Share Posted July 20, 2021 Got a button switchy thing . Spot lights on the front are wired to use one as high beam & the other as low beam. Have wired the switch in so I have the choice of having both spot lights on for high beam if I want. 2 Quote Link to comment
wraith Posted July 20, 2021 Share Posted July 20, 2021 All coming together nicely. You know they say your workshop/space resemble the way your brain is, yours is like mine, lots of stuff in there somewhere 1 Quote Link to comment
clivegto Posted July 21, 2021 Share Posted July 21, 2021 11 hours ago, wraith said: You know they say your workshop/space resemble the way your brain is, yours is like mine, lots of stuff in there somewhere You should see the other sheds 1 Quote Link to comment
Gsxrsam Posted July 23, 2021 Share Posted July 23, 2021 On 7/21/2021 at 9:01 AM, clivegto said: You should see the other sheds Seen em, they look like mine.....:) 1 Quote Link to comment
clivegto Posted July 24, 2021 Share Posted July 24, 2021 9 hours ago, Gsxrsam said: Seen em, they look like mine.....:) Yea indeed Quote Link to comment
clivegto Posted July 28, 2021 Share Posted July 28, 2021 Everything appears to be working correctly on the wiring loom just needs rapping up. Quite a lot of the wires are not needed as it turns out. 7 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.