Jump to content

Swirl's Harris


Swirl

Recommended Posts

Had the seat bracket that I made done in green so it blends into the frame where it fastens to the main frame. Head cooler return to the cam cover didn't fit any moras it was touching the frame rail. Once it was on its wheels I slakend all the engine mounts, engine then sank about 5mm at the back enabling the return to fit. Put the renthal bars on which have also been powdered black, fitted the side stand & wheeled it outside for a walk round it. IMG_20200907_183128.thumb.jpg.40dbfaaf5d1d5cd61249bc0e2fab3343.jpgIMG_20200908_155527.thumb.jpg.f7695267ad21aee33325d66eafae67a2.jpgIMG_20200907_184749.thumb.jpg.9ddad74ce3fcf2956ea1bd93946f689d.jpgIMG_20200908_175427.thumb.jpg.238214a9ef5e6beb199564e1f10bd008.jpgIMG_20200908_173726.thumb.jpg.628f00083155494bf6d498abda05b7a0.jpgIMG_20200908_173700.thumb.jpg.e071c33799c805f3457f1c37ab4e9f4b.jpg

  • Like 7
Link to comment

Got some heat resistant heat shrink belive it or not to cover the stainless braided oil cooler lines from the main cooler up front. Didn't want to use the black braided stuff near the exhaust as I have had it melt on the exhaust on my old b12 which resulted in the engine emptying its oil allover the back wheel. Anyway hears a few pics of what I've been doing. IMG_20200918_162206.thumb.jpg.94f05262ac733cb8f6080315d8c742bb.jpgIMG_20200918_173610.thumb.jpg.cafdfa88bc711e6aa3d98f6418964e89.jpgIMG_20200918_173621.thumb.jpg.560d7fb7ff4e8116ce31259c28bd1ac9.jpgIMG_20200918_173828.thumb.jpg.7264f6616778e1eeb33509dcc6b3851e.jpgIMG_20200918_173839.thumb.jpg.51c902db65e6f77a611593ef3993a7fe.jpgIMG_20200918_173902.thumb.jpg.1ba946a9fe8c3662fa2cbc2190a41975.jpgIMG_20200918_174131.thumb.jpg.88b6f2acc0cbcddb4a5d0b535779c89c.jpgIMG_20200918_175459.thumb.jpg.51a92a0d97a9c7d6bc398b2b0a62991d.jpgIMG_20200918_175357.thumb.jpg.d342fa76401da49c663fdf9b9a47795d.jpg

IMG_20200918_173828.jpg

IMG_20200918_173610.jpg

  • Like 2
Link to comment

M16x1.5 

10 minutes ago, Wagola said:

Hi @clivegto, what is the threads/tap size you put in to the clutch cover ? Looks like an option I could go with rather than welding fittings in.

M16x1.5  case is only very thin that's why I also made the 2 washer nuts up to secure them on the back of the case, will also use a dab of J. B. Weld to secure them. 

Edited by clivegto
  • Like 1
Link to comment

Got a couple of little red reservoir pots for the front brake & clutch. Started to make some brackets to mount them directly over the inlet to the master cylinder (no bendy pipes) out of a old r1 swing arm. Not completely happy with these one's so will be remaking them, but you get the idea. IMG_20201001_180057.thumb.jpg.79a9db505c9b7ab7e6dc1c682609f1e5.jpgIMG_20201001_163634.thumb.jpg.1d258457b7ca8978135fe703ac3215a2.jpgIMG_20201001_165327.thumb.jpg.73ce691dc5252477938583382ba4b273.jpgIMG_20201001_172424.thumb.jpg.c184e8e158a73c6b805856e42691b413.jpgIMG_20201001_180302.thumb.jpg.f2449e91e636e0450a3d32b0490255a3.jpgIMG_20201001_175006.thumb.jpg.d609f87d35aae853adb63f2fa7b61434.jpgIMG_20201001_175049.thumb.jpg.92478994c4e2cd070a53dab1a2fdc941.jpg

  • Like 4
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...