Guest Posted April 6, 2020 Share Posted April 6, 2020 On 3/28/2020 at 4:01 PM, clivegto said: Shaped another 14 alen head bolts up for the 1127 sump. Put most of it together for a mockup, free wheeled down the ramp out of the shed (YEEEHAAA) to take some pictures. can`t wait to se this finished. Is that a CBR 600 r fairing I see attached to the front ? Quote Link to comment
clivegto Posted April 6, 2020 Share Posted April 6, 2020 12 minutes ago, GS1000 78 said: can`t wait to se this finished. Is that a CBR 600 r fairing I see attached to the front ? No 125. 1 Quote Link to comment
mick-ne Posted April 7, 2020 Share Posted April 7, 2020 Looking good Clive,where did you get the Scavenge pump ? Quote Link to comment
clivegto Posted April 8, 2020 Share Posted April 8, 2020 11 hours ago, mick-ne said: Looking good Clive,where did you get the Scavenge pump ? Turbo page on FB. Quote Link to comment
clivegto Posted April 8, 2020 Share Posted April 8, 2020 @mick-neplaning on making one myself when I get my hands on a mill. Inside is is a pit bike oil pump. Also been told its a good idea to fit a brass Bush as the aliminium soon wears. 1 Quote Link to comment
Gixer1460 Posted April 8, 2020 Share Posted April 8, 2020 1 hour ago, clivegto said: Also been told its a good idea to fit a brass Bush as the aluminum soon wears. Not sure where that rumour has come from as pretty much every oil pump using this design, runs steel 'gears' in aluminium housings and they run for years, usually only failing due to 'foreign bodies' going through them. Maybe 'soft' aluminium was used and hence wear occured? I'd be tempted to use HE30 / 6000 series for better machinability? Quote Link to comment
clivegto Posted April 8, 2020 Share Posted April 8, 2020 @Gixer1460man said he had bought one same as my one from same man who made them. Maybe some shit did go through it. He says no problem since fitting a brass Bush. Quote Link to comment
clivegto Posted April 8, 2020 Share Posted April 8, 2020 @mick-nebloke that made scavang pump was Lucas Hinrichs on Turbo Bike facebook page. Quote Link to comment
mick-ne Posted April 8, 2020 Share Posted April 8, 2020 3 hours ago, clivegto said: @mick-nebloke that made scavang pump was Lucas Hinrichs on Turbo Bike facebook page. Thanks Clive will take a look. Did you get the extra oilpump with it or is that one you bought for later ? Quote Link to comment
clivegto Posted April 9, 2020 Share Posted April 9, 2020 10 hours ago, mick-ne said: Thanks Clive will take a look. Did you get the extra oilpump with it or is that one you bought for later ? Extra pump was £10 of the bay of e. Scavang pump & case was €250. 1 Quote Link to comment
kja.busa Posted April 12, 2020 Share Posted April 12, 2020 Great thread, just read it from start to finish, some nice touches. 1 Quote Link to comment
clivegto Posted May 23, 2020 Share Posted May 23, 2020 Made a couple of little brackets to hold the top of the faring/headlight oil cooler bracket to the top yoke. Picked a couple of vintage brand new road runner spot lights up for £10. Billet mounting bracket was designed to be able to change the lighting arrangement round easily if I want to. I knocked a bracket up for the spotlights, quite like the look of the spots. 6 Quote Link to comment
clivegto Posted May 24, 2020 Share Posted May 24, 2020 Some people have pointed out that it looks like Hoover, think I may keep it like that. 7 Quote Link to comment
dupersunc Posted May 24, 2020 Share Posted May 24, 2020 Looks much better than the R1 fairing. 3 Quote Link to comment
clivegto Posted May 24, 2020 Share Posted May 24, 2020 Drilled some holes in the spotlights bracket to allow more air flow to the oil cooler. Also matches the bottom oil cooler bracket looks oldskool as well & part of the weight saving programme. Bike does feel light when I am sat on it. 10 Quote Link to comment
SiBag Posted May 24, 2020 Share Posted May 24, 2020 Very tidy.. Liking the bracket.. 1 Quote Link to comment
clivegto Posted May 24, 2020 Share Posted May 24, 2020 50 minutes ago, SiBag said: Very tidy.. Liking the bracket.. Thanks mate. Quote Link to comment
Nelson Posted May 24, 2020 Share Posted May 24, 2020 Looks like a propa old skool fighta, great build 2 Quote Link to comment
Stuntmonkey Posted May 24, 2020 Share Posted May 24, 2020 Love the twin spot,proper old skool 1 Quote Link to comment
yann7/11r Posted May 25, 2020 Share Posted May 25, 2020 All, look totally great ! 1 Quote Link to comment
clivegto Posted May 27, 2020 Share Posted May 27, 2020 Sam made me the parts for a extended clutch cover for a lock-up clutch like on my other bike but I cut the back of this one off at a angle so it sits more square when you are looking at the bike. Got my mate Will at Weab Motors to weld it up he also welded the first stage of the plenum up at the same time. 8 Quote Link to comment
clivegto Posted May 31, 2020 Share Posted May 31, 2020 Stage 2 of plenum, its a very tight fit there's not a lot of room. Just need to get Will to weld it up. 3 Quote Link to comment
clivegto Posted June 3, 2020 Share Posted June 3, 2020 (edited) Will welded stage 2 up of the plenum, also got some An6 & an8 fittings in the post. Edited June 3, 2020 by clivegto 4 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.