Jump to content

Swirl's Harris


Swirl

Recommended Posts

On 3/28/2020 at 4:01 PM, clivegto said:

Shaped another 14 alen head bolts up for the 1127 sump. Put most of it together for a mockup, free wheeled down the ramp out of the shed (YEEEHAAA) to take some pictures. IMG_20200328_154349.thumb.jpg.b234bc210a061c1c82eb81a94aecb298.jpgIMG_20200327_162135.thumb.jpg.c88ff7a09fda82f1418f45e069fcf8f2.jpgIMG_20200327_162638.thumb.jpg.9f35c676009da9ec3c838af43a9a6ef4.jpgIMG_20200327_162048.thumb.jpg.5d680248382c16126c178a3b9965ea2e.jpgIMG_20200327_162406.thumb.jpg.742a0f4b77dc339e538ef584f095e970.jpgIMG_20200327_162457.thumb.jpg.5979aa7aff4092fbaaa82bdace824e87.jpgIMG_20200327_162157.thumb.jpg.7b59287f0d169de87ff8b11f35c98b38.jpgIMG_20200327_164450.thumb.jpg.197c0cff4f94f3889ad25e5d53d16038.jpg

can`t wait to se this finished. Is that a CBR 600 r fairing I see attached to the front ?

Link to comment
1 hour ago, clivegto said:

 Also been told its a good idea to fit a brass Bush as the aluminum soon wears. 

Not sure where that rumour has come from as pretty much every oil pump using this design, runs steel 'gears' in aluminium housings and they run for years, usually only failing due to 'foreign bodies' going through them. Maybe 'soft' aluminium was used and hence wear occured? I'd be tempted to use HE30 / 6000 series for better machinability?

Link to comment
  • 1 month later...

Made a couple of little brackets to hold the top of the faring/headlight oil cooler bracket to the top yoke. Picked a couple of vintage brand new road runner spot lights up for £10. Billet mounting bracket was designed to be able to change the lighting arrangement round easily if I want to. I knocked a bracket up for the spotlights, quite like the look of the spots. IMG_20200523_150949.thumb.jpg.44b3634695956e5a14dfb2ebdb27b60a.jpgIMG_20200523_155348.thumb.jpg.a1a19821ce03891366fffdf8b2680837.jpgIMG_20200523_130017.thumb.jpg.a891333692429af00a30c8ba240f511a.jpgIMG_20200523_155542.thumb.jpg.a24500ee524d5f71501250b4fac50cab.jpgIMG_20200523_160155.thumb.jpg.52bd145b576788d4c265c78f179aca8e.jpgIMG_20200523_160618.thumb.jpg.41839b3816ab0d56b47ffec0c04979f8.jpgIMG_20200523_160351.thumb.jpg.edc483f7c6eaa44b890366fc1892780f.jpg

  • Like 6
Link to comment

Sam made me the parts for a extended clutch cover for a lock-up clutch like on my other bike but I cut the back of this one off at a angle so it sits more square when you are looking at the bike. Got my mate Will at Weab Motors to weld it up he also welded the first stage of the plenum up at the same time. IMG_20200527_163933.thumb.jpg.89c2bced2609e45f68fcee34499c5fc0.jpgIMG_20200527_163916.thumb.jpg.2bdac8e77dd0692198792fdd7ba10b0e.jpgIMG_20200525_150855.thumb.jpg.afd1de835820550716903a8bd831ebd6.jpgIMG_20200525_151214.thumb.jpg.5ebb2092419120b21129a5cef93e81ee.jpgIMG_20200525_151945.thumb.jpg.f0dbbe2afda8b21ce27732ece2e9d19c.jpgIMG_20200527_163826.thumb.jpg.82a13ac4c753d733e92137b320b49294.jpgIMG_20200527_163856.thumb.jpg.60752b5bdd396fb4e692c8ecd8ee9eec.jpgIMG_20200527_164421.thumb.jpg.a7aa1ff877af11230550e2c5100c288d.jpgIMG_20200527_164513.thumb.jpg.4e80f8a74999c53f91d5b5131f30a248.jpg

  • Like 8
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...