Jump to content

Swirl's Harris


Swirl

Recommended Posts

27 minutes ago, stockcar said:

Seems that everyone on this forum that has fitted them is 'wrong' then..........:stop:

Sounds like a “recall” is due.....

Or they could supply some laser cut disc spacers to sort the issue, coupled with a full set of brake lines as a gesture of goodwill for the inconvenience 

  • Like 1
Link to comment

Pinched the Upperton  flowed big valve head from my 1216 high comp motor I had under the bench for the Harris. Replaced it with a standard b12 head I knocking about. Timed it up & did valve clearances. Might put this motor in the Harris to get it running as the main motor build is not going acording to plan right now.

20190210_155456.jpg

20190210_155407.jpg

20190209_164018.jpg

20190207_170055.jpg

  • Like 2
Link to comment
On 1/19/2019 at 4:37 PM, clivegto said:

Wasn't just quite happy with the look of the brace so moved it backwards & down a bit. Had a 1100 slabby swinging arm that was cracked where one of the bearings fits so chopped it up to make a cross brace for the shock brace to sit on.

20190119_145823.jpg

20190119_161411.jpg

 

 

Proper OSS when you start looking at frames & swinging arms as a source of material. Fab build.

  • Like 1
Link to comment
On 2/11/2019 at 3:35 PM, Mar71n said:

Proper OSS when you start looking at frames & swinging arms as a source of material. Fab build.

Thanks man.

The harris supper bike yokes have a + - of 3mm off set, set them on the +3mm this should give me a bit more for the oil cooler, reckon I can get a 19 row one in there. Test fitted the new turbo there is a little wheel to turbo clearance but will move it further back, there's loads of room for this compared to my turbo scratcher.

20190212_170803.jpg

20190212_165129.jpg

20190212_154039.jpg

  • Like 2
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...