gsxr 750 2003 swing in a slingshot.

[sbk replica]

hi guys, 

im currently working on a slingshot and fitting a 03 750 swinger into it.

i now came to the point of getting a link system that works, 

i found that i need a adaptor to fit the doggone onto the frame, im going to make this sometime this week,

but what shock would be suitable with this setup ? 

thanks in advance.

[MeanBean49]

Easiest way to do it is use the slingshot shock and linkage and just make some linkages from some ally bar and 4 female rose joints. Rand my race bike the same way.

What wheel are you using?

[Redpear]

What length dog bones did you use on your race bike for this arm?

[MeanBean49]

Cant remember. Measured it when was all in place. Put swingarm where it looked to be standard height and se rose joints to mid way position so i had plenty of adjustment either way

[Fula28]

I fitted k5 arm in my slingshot, with k7 shock (wrong valving) and now have 11-slingshot shock with 750m linkage, and I made dogbones from t6 alloy bar m12 rose joints.pics show k7 shocker with m-linkage.

but 11 -H shocker is same hole spacing .i am going to have k7 revalved to suit , just need to measure the whole set up.

[sbk replica]

@fula28 , did you use the linkage in the first pic or the second and 3rd picture?

Edited August 9, 2016 by sbk replica