CockneyRick Posted January 29 Posted January 29 (edited) So i'll need another stem, question is what's best choice? Seen a few on Eblag mostly for SV's & even a Busa. What are your recco's? Currently has GSXR1100L yokes in with no stem swap. Edited January 29 by CockneyRick Quote
Gsxrsam Posted January 29 Posted January 29 busa needs expensive top bearing...... Bandit is same as slingy but about 20mm longer.... Not seen sv so cannot advise...... 1 Quote
CockneyRick Posted January 29 Author Posted January 29 2 hours ago, Dezza said: Swap GSXR stem to Blandit yokes? That looks like the sensible route Quote
krazy kat Posted January 29 Posted January 29 (edited) I use gsx750f / 600 circa 2000 stems on bandit yokes, they tend to be plentiful and cheap in the states, fit straight in, seem to remember some gsxr stems needing knurling or build up for good press fit. Used DL v-strom 1000 yokes on my efe gsx750f stem top yoke needs bush and a few MM taken from height. Offset on DL v-strom is more better for efe Edited January 31 by krazy kat put SV should be DL getting old 2 Quote
GSX1100dreamn Posted January 30 Posted January 30 I had my 20mm longer bandit stems cut and rethreaded for my GSX frame. Quote
Gsxrsam Posted January 30 Posted January 30 21 hours ago, Dezza said: Swap GSXR stem to Blandit yokes? 21 hours ago, Dezza said: Swap GSXR stem to Blandit yokes? be careful tho, as some gsxr bottoms are 33.3 not 33.... or bandit... memory poor 3 Quote
Gsxrsam Posted January 31 Posted January 31 23 hours ago, CockneyRick said: Bugger just don't push all way out and measure before committing...... 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.