TonyGee Posted December 31, 2025 Posted December 31, 2025 1 hour ago, baldrick said: i might try a non vacuum tap, if i can find one first, just in case its not pulling enough vacuum, or check the diaphragm on the vac hose connected carb for damage, just in case have you tried it on prime ? that should fill the float bowls up. 1 Quote
baldrick Posted December 31, 2025 Author Posted December 31, 2025 57 minutes ago, TonyGee said: have you tried it on prime ? that should fill the float bowls up. yes mate, tried it on prime. ill pull the carbs when i get a half decent day, give them another clean i suppose. the more im dicking about with the little 600 motor, the more i wish i had just lobbed in the 1100 1 Quote
wraith Posted December 31, 2025 Posted December 31, 2025 Before you take the carbs off, I'd do 3 things first. 1. Take the fuel cap off, so the tank is open to the air. 2. Unscrew the carb float bowls drain screws. 3. Turn the tap onto prime. At least this way you will know if fuel is getting to the carbs with a good flow and to each carb 1 Quote
fab Posted December 31, 2025 Posted December 31, 2025 you can also try spraying some starting fluid to see if it fires. then you will know it's a fuel problem. 1 Quote
Swiss Toni Posted December 31, 2025 Posted December 31, 2025 Fuck the bike, man! Break out the malt! 2 Quote
baldrick Posted January 1 Author Posted January 1 3 hours ago, Swiss Toni said: Fuck the bike, man! Break out the malt! i did mate.... hahahaha strathisla 12 year old, nice drop too 3 Quote
baldrick Posted January 1 Author Posted January 1 (edited) Not today, it's actually snowing ffs Edited January 1 by baldrick 1 Quote
wraith Posted January 1 Posted January 1 Well I suppose it is winter and you are up north some what lol 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.