Blandits footrests

[baldrick]

Hi. I'm fitting the footrests to the frame today.

Obviously they have rubber mounts but tightening them up it looks like there is a fair old bit of movement in them.

When I lean on them with my hand there's about 5mm movement......that can't bear. Right surely

I added another washer between the footrest hangar and frame, but there's still a fair bit of movement..

Question is....is this normal or have I missed something out.?

I've checked pegs are solidly mounted to backplate. There are no ferrules missing etc?? Bolts are f tight....I'm stumped....unless that's " just the way they are"

Any ideas

Cheers

[Ted M]

No that's not right mate They don't move that much only "give" that's in the rubber bush. The rubber bush should be sandwiched between the footrest bracket and a washer (part 5). The metal part of the bush fits inside the hole of the washer (part 5). 

 

[baldrick]

Ah right. 

I'm just using normal M8 washers so the bush isn't locating inside them.

I presume that's where I'm going wrong.

One of the mounting holes has this rubber type washer over the bush in the back. So I take it this should be steel

[baldrick]

Rubber washer fitted

[Ted M]

That's it mate the washers are rubber they should be quite solid once you bolted it all up. They're a pain to put on as the washers drop off use a bit of grease to hold them in place.

Edited November 3, 2025 by Ted M
Added Info

[baldrick]

ahh ok, cheers, ill have to order some . 

so do the metal washers fit over the top of these then?

[baldrick]

scrub that im not ordering anything, not at 70 odd quid for a dozen rubber washers.

ive got a sheet of rubber and a hole punch ill make me own

[Ted M]

The rubber washers are part 5 you only need one metal washer they are part 4

[Ted M]

The size of the washer is 12.6X24X1.9

[baldrick]

Too late, they're made lol.

Well the rubber washers are. Meant to be 8.5 but I only had a 9mm hole punch. They're thicker too but they will compress.

Cheers for the washer info Ted