busa ash Posted August 7, 2016 Author Posted August 7, 2016 ok some minor mods too get this into the 1980 s frame 2004 mv agusta brutale swingarm , second picture shows how much travel and doesnt hit bodywork Quote
busa ash Posted August 7, 2016 Author Posted August 7, 2016 i am still waiting for the cush drive sprocket etc from the states , but i can now progress with other areas of the build 3 Quote
busa ash Posted August 9, 2016 Author Posted August 9, 2016 few bits of hard too find mv agusta parts 2 Quote
busa ash Posted August 11, 2016 Author Posted August 11, 2016 yeah cushdrive and so finally all the parts are here to get this build back on track want it built for october for stafford show with the ssmcc (bike wont be painted by then no money ) Quote
busa ash Posted August 11, 2016 Author Posted August 11, 2016 bloody italians using m7 nuts on disc carrier ring £7.19 each x 4 had too order as dont have m7 in my many boxes of stainless still happy that i have all the major parts to carry on Quote
Gammaboy Posted August 12, 2016 Posted August 12, 2016 10 hours ago, busa ash said: bloody italians using m7 nuts on disc carrier ring £7.19 each x 4 had too order as dont have m7 in my many boxes of stainless still happy that i have all the major parts to carry on The Japs are just as bad at using M7s and shit. 1 Quote
busa ash Posted August 12, 2016 Author Posted August 12, 2016 armstrong wavey disc , all bolted up and happy 1 Quote
busa ash Posted August 16, 2016 Author Posted August 16, 2016 three bike builds are being done as and when time and parts are available . had a look at shock mount options .and have a longer newer shock on the way from Eblag as i am looking too try noy modding the frame(no welding) so i have to chat with an engineer to check on best option 1 Quote
busa ash Posted August 17, 2016 Author Posted August 17, 2016 (edited) . Edited August 24, 2016 by busa ash wrong pic 1 Quote
busa ash Posted October 3, 2016 Author Posted October 3, 2016 just had a new seat made by ragged edge racing , and i am looking into water jetted new shock mount then having it brazed on too frame 2 Quote
Dezza Posted October 4, 2016 Posted October 4, 2016 I always liked that style of Mag 1 seat unit. Did the seat bloke copy your old unit? Are you using a Mag 2 tank? If so, won't you have a great big gap where the mag 2 seat is supposed to slot in at the back and sides? 1 Quote
busa ash Posted October 4, 2016 Author Posted October 4, 2016 dezza . No he copied another magnum 1 seat from my mate . I am having my tank modified to fit the frame . I have been trying to buy a spare tank but no luck so far Quote
busa ash Posted October 8, 2016 Author Posted October 8, 2016 front fairing and front mudguard are off at painters being primmed as the colours are sending my eye s screwy , getting all the assorted electrical items together to check i am nearly ready for the loom . need to have a move round as too many parts that can get bashed/ damaged are in here having a few rear shocks too get this thing sitting right , i need to get the rearsets mounted on for test fit of me and bike and the reach to the bars then i can have new mounting plates made for the giles reasets Quote
busa ash Posted October 11, 2016 Author Posted October 11, 2016 bike stripped frame and tank delivered to a top bloke who builds frames and is going to help do a small mod on the frame rear shock mount , and a tank mod 1 Quote
busa ash Posted October 12, 2016 Author Posted October 12, 2016 nose fairing primed and mudguard small repair and primed few boxes packed so nothing gets damaged Quote
busa ash Posted October 15, 2016 Author Posted October 15, 2016 Work had me working late so couldnt get van and other bike to Stafford. So as my frame is away with stewart at saxon engineering . I thought i would start cleaning up my engine before pic for now Quote
Swirl Posted October 15, 2016 Posted October 15, 2016 I had a guy who used do all my soda blasting, he give it up one day out the blue and haven't been able to get anyone at all for 2 years localish, north wales Cheshire merseyside 1 Quote
SiBag Posted October 16, 2016 Posted October 16, 2016 The only people Iv found localish is JWS Sandblasting in Crewe. Need to give them a call to see if they can do an engine. http://jwssandblasting.co.uk/ 1 Quote
stockcar Posted October 16, 2016 Posted October 16, 2016 You might struggle to keep it sealed during blasting 1 Quote
Dangerous Posted October 16, 2016 Posted October 16, 2016 Dam she's coming together well man I have a set of polished cam covers off a 750 in a cupboard if yer needing 1 Quote
busa ash Posted October 17, 2016 Author Posted October 17, 2016 Dangerous i am using these on this engine now a one off set i had done last year 1 Quote
busa ash Posted October 18, 2016 Author Posted October 18, 2016 Well been waiting for one too show up on that sight we love too hate . Patience is a virtue and i have it . Described as nearly new and it is racefit growler carbon and titanium 2 Quote
busa ash Posted October 19, 2016 Author Posted October 19, 2016 The parts bin is getting full few parts have been sent away and waiting on few more bits too arrive Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.