Guest Manxzookie Posted April 9, 2016 Share Posted April 9, 2016 NIce one paddy Quote Link to comment
Guest Manxzookie Posted April 10, 2016 Share Posted April 10, 2016 Watch the 250 treble in value paddy ! strokers are heading north better than money in the bank Quote Link to comment
1260EF Posted April 11, 2016 Share Posted April 11, 2016 Slightly jealous not enough 2 strokes about now, and not allowed to mention elsies on here Quote Link to comment
Captain Chaos Posted April 12, 2016 Share Posted April 12, 2016 8 hours ago, 1260EF said: Slightly jealous not enough 2 strokes about now, and not allowed to mention elsies on here you can mention them.... in the right context. 1 Quote Link to comment
Simbec1863 Posted April 12, 2016 Share Posted April 12, 2016 On 30 March 2016 at 11:13 PM, p4ddy said: My mate had an RG 250 mk1 in his shed but he's a Yamaha man. Well after getting me to part with £800 its mine and in my garage. Needs a few wear and tear things replaced and a general clean and service and I can get it mot'd. Its that or strip it down for a deep clean and tidy things up with some paint which I could do when winter comes back round. http://i1099.photobucket.com/albums/g396/paddy-b/Mobile%20Uploads/WP_20160330_21_01_31_Pro_zps9qdhnbra.jpg[/IMG https://www.youtube.com/watch?v=GKRoMSfbqxg I did the same with my RGV, thought I would make it roadworthy, next thing the engines out and I'm pricing up shiny stuff...... Quote Link to comment
Guest Manxzookie Posted April 12, 2016 Share Posted April 12, 2016 Shitloads of smokers where I live Quote Link to comment
p4ddy Posted April 15, 2016 Author Share Posted April 15, 2016 On 12/04/2016 at 6:55 PM, Manxzookie said: Shitloads of smokers where I live That you stuey? Quote Link to comment
Fula28 Posted April 22, 2016 Share Posted April 22, 2016 Nice one did a mk2 two years ago, for a mate was a pig to get parts for but hey I got there he paid me penuts to do it but I love a good Suzuki stroker! Will keep an eye on your efforts. 1 Quote Link to comment
p4ddy Posted May 21, 2016 Author Share Posted May 21, 2016 0nly taken over a month to get the bearing cases out the swingarm an cushion lever. Got the last one out today then cleaned and polished (just autosol and cloth not mirror) the frame. I'm now ready to start r ed building at last. Quote Link to comment
p4ddy Posted May 21, 2016 Author Share Posted May 21, 2016 cleaned and polished the frame aswell whist listening to the charts from 83 which was very appropriate. 2 Quote Link to comment
nightrider Posted May 21, 2016 Share Posted May 21, 2016 Nice purchase! Next to impossible to find here the the Sates. They were strictly gray market. Use to ride with a buddy who had the 500 (not sure which year). Always wanted either one 1 Quote Link to comment
p4ddy Posted May 30, 2016 Author Share Posted May 30, 2016 Got new bearings in the swingarm, all cleaned and put together Quote Link to comment
p4ddy Posted May 30, 2016 Author Share Posted May 30, 2016 Got it in the frame, refit the rear mud guard and got a rolling chasis to make fitting bits to the frame easier before doing the forks and the wheels etc 3 Quote Link to comment
Reinhoud Posted June 1, 2016 Share Posted June 1, 2016 Nice! Mate of mine had one, I loved it! 1 Quote Link to comment
p4ddy Posted June 1, 2016 Author Share Posted June 1, 2016 Airbox, battery tray and indicator wing rests ?? all cleaned and fitted II 1 Quote Link to comment
p4ddy Posted June 2, 2016 Author Share Posted June 2, 2016 loom and the wings fitted...oh and the seat coz I couldn't resist a little sit on it. 1 Quote Link to comment
Captain Chaos Posted June 2, 2016 Share Posted June 2, 2016 1 hour ago, p4ddy said: loom and the wings fitted...oh and the seat coz I couldn't resist a little sit on it. of course while making vroom vroom ring ding ding noises 1 Quote Link to comment
alfiestorm Posted June 2, 2016 Share Posted June 2, 2016 Bit of elbow grease works wonders, nice bike and nice work 1 Quote Link to comment
Guest Manxzookie Posted June 5, 2016 Share Posted June 5, 2016 Keep at it paddy it's getting there I will keep my ears open for any nice bits that might appear over here for sale as there's loads of bits stashed away over here it's just bumping into the right person Quote Link to comment
p4ddy Posted June 5, 2016 Author Share Posted June 5, 2016 Thanks mate, a standard chain guard and a set of end cans is the 2 things that I need atm . Quote Link to comment
Guest Manxzookie Posted June 5, 2016 Share Posted June 5, 2016 You can get alloy skins for the end cans Quote Link to comment
Guest Manxzookie Posted June 5, 2016 Share Posted June 5, 2016 Or get a pair of nice tyga cans and a flange kit for not much money Quote Link to comment
p4ddy Posted June 5, 2016 Author Share Posted June 5, 2016 huhu, hu hu huhuhuhuhu hey Beavis, he said 'flange' uuuhuhuhuhuhuhuhu. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.