Jump to content

Rear disc help - SRAD 240mm swap


Recommended Posts

Posted

Hopefully this is the right place to ask.

I've got an SRAD 600 rear wheel in a 1250 arm. To get it all to fit without machining a zxr hanger goes in lovely and uses the same caliper as the SRAD. 
 

The issue is the SRAD disc is 220mm and the zxr uses a 240mm disc so the caliper isn’t sitting fully on the disc. 
 

I can see various Suzuki like bandit / sv / TL are 240mm, but the PCD is different? I think the SRAD is 108 and bandit etc is 141mm?

Does anyone know of a bolt on 240mm rear that would match up? Potentially RF or 750W? I think the 750W lists as 89mm which is the same inner diameter as SRAD.

cheers!

  • 2 weeks later...
Posted

Yes it does. Bandit 600 disc bolted straight up. So if for any reason you want to fit an srad wheel in a 1250 arm you can use a zxr400 hanger by popping out the spacer bush to make the spindle fit. Just need to machine up a flat spacer to go between the wheel and hanger.

 

IMG_5421.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...