Jump to content

Busa back ens conversion GSXR 1100...


Recommended Posts

Hi all

 

I am looking at putting a gen 1 complete busa back end into my GSXR 1100 K frame,, is this a fairly straight forward fit? Does the busa swingarm spindle fit into the frame or am i going to have to use an 1100k spindle and make spacer etc to fit? (Are all 1100/750 spindles the same?) only reason i ask is that i am finding it hard to find one complete with spacers pivot adjuster and nuts :(,, 

thanks 

scott

Link to comment

Put the slingshot spacers inside the Busa spacers and the slingshot spindle will fit,I glued mine together with chemical metal,was in the bike for several years with no probs,can't remember what knuckle or dogbones I used though sorry. I think I  made a smaller length spacer inside the sprocket carrier to push the carrier into the wheel further and reversed the sprocket as well.

Edited by Paulm
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...