KennyKak Posted July 3 Share Posted July 3 So I've put my powerscreen engine into the 750 slingshot frame and all but one of the mounting holes is lining up. The front mount on the break away frame is quite a bit out. Have I fucked something up here of is something else fooked. BTW when I bought the frame it had been fitted with a bandit 12 lump and the front mounts have been messed with Quote Link to comment
clivegto Posted July 3 Share Posted July 3 Should fit straight in if the 750 mounts are the right way round. Fit all engine bolts loose before tightening any of them up Quote Link to comment
fatblokeonbandit Posted July 3 Share Posted July 3 Has the rear bottom mount been enlarged to 12mm or a smaller 10mm bolt fitted and holes left at 10mm???? Quote Link to comment
KennyKak Posted July 3 Author Share Posted July 3 1 hour ago, fatblokeonbandit said: Has the rear bottom mount been enlarged to 12mm or a smaller 10mm bolt fitted and holes left at 10mm???? Bored ot to 12mm. Quote Link to comment
dupersunc Posted July 3 Share Posted July 3 J/k and l/m front mounts are different I think. Quote Link to comment
clivegto Posted July 3 Share Posted July 3 Origanl mounts to the frame need to be used. Quote Link to comment
KennyKak Posted July 4 Author Share Posted July 4 Yeah it's an L/M and can't find any mounts right now. And don't have enough of a ranking to go on the wanted page on here Quote Link to comment
DAZ Posted July 4 Share Posted July 4 50 minutes ago, KennyKak said: Yeah it's an L/M and can't find any mounts right now. And don't have enough of a ranking to go on the wanted page on here I thought it was 50 posts ? You should be able to 2 Quote Link to comment
GeorgeEI7KO Posted July 5 Share Posted July 5 Just make some new mounts from some 6mm ally. Job done innit? 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.