Jump to content

GS750 - GS1000 swingarm swap


Rijko

Recommended Posts

Bearings are different sizes 22 X 29 X 30 on the 750         25 X 33 X 30  on the 1000

so should transfer from the 750 by making top hat bushes for the 1000 frame keeping the 750 stuff

  But you may luck out and find its a 1000 arm sleeved down to fit the 750 so some one could run wider wheel, fingers crossed

                                                                            

  • Like 1
Link to comment

i'm collecting parts to build something like this :

skunk.jpg.ad07ccde040b81bf56b25bd98ea17e

I will open a build thread for this one later on.

That 'Zero' seat is on my whishlist, very hard to find.

If it is a ZR 550 swingarm, i found a Fleabay ad that claims all models '91-'99 use the same 25 X 33 X 30  bearings as the GS1000,

so crossing my fingers this is an easy swap. Time saved will be put into polishing the swingarm.

  • Like 1
Link to comment
5 minutes ago, Rene EFE said:

Can't you get them new? New is always the best option with magnesium wheels. 

Dymag is back in business, and they do produce the magnesium 3-spoke wheels.

Quote

The Classic CH3 Range are the World's original three spoke Magnesium motorcycle wheels as used by Eddie Lawson.

Pricing starts at £2400 :/

I was hoping for old wheels and having them inspected by Dymag...

Link to comment
  • 4 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...