600.mk1 bandit

[congy]

Anybody.know what works involved.changing a bandit 600 engine..and replacing with a mk1 .1200.complete engine 

[TonyGee]

easy peasy, just drill out the rear lower engine mount holes to suit the 1200 engine. 

[Swiss Toni]

5 hours ago, TonyGee said:

easy peasy, just drill out the rear lower engine mount holes to suit the 1200 engine. 

Or sleeve the mount wi a bit pipe!

[TonyGee]

4 minutes ago, Swiss Toni said:

Or sleeve the mount wi a bit pipe!

I was gona say that Toni but whats the chances of a 600 engine going back in ??? 

[congy]

Cheers all...is there any electric modds

[TonyGee]

1 hour ago, congy said:

Cheers all...is there any electric modds

not really, the rev limit is higher on the 600 though so done over rev it. what carbs are you wanting to use ?  and what about brakes and suspension ?

[wraith]

Just use the 600 ATU etc on the 1200, use the 1200 Geny or you will need to change the 600 Geny sprocket for a 1200 one as the 600 are bigger (just found that out myself) apart from that plug and play. 

As @TonyGee says what you thinking about running gear as the 1200 will not like the 600 suspension