TJS Posted March 13, 2023 Share Posted March 13, 2023 I used the neutral?gear indicator from a GS 850 for a Bandit 400. It was then connected to a led display from online store. 1 Quote Link to comment
TJS Posted March 13, 2023 Author Share Posted March 13, 2023 Testing the 850 part. 3 Quote Link to comment
TonyGee Posted March 13, 2023 Share Posted March 13, 2023 noooooo they take away the fun of looking for the 6th gear you haven't got 4 Quote Link to comment
wraith Posted March 26, 2023 Share Posted March 26, 2023 On 3/13/2023 at 3:50 PM, TJS said: I used the neutral?gear indicator from a GS 850 for a Bandit 400. It was then connected to a led display from online store. Do you know the size of the switch? Thinking if it would fit a oil cooled motor? Quote Link to comment
Captain Chaos Posted March 26, 2023 Share Posted March 26, 2023 (edited) I know that EZ/ED/EFE switches fit oilcooled motors, I had one on my B12 engine, connected to EFE clocks. I think 850 ones are the same size. Only needs a re-arrangement of the pins in the connector because the switch drum turns the other way round. Edited March 26, 2023 by Captain Chaos 3 Quote Link to comment
davecara Posted March 26, 2023 Share Posted March 26, 2023 45 minutes ago, Captain Chaos said: I know that EZ/ED/EFE switches fit oilcooled motors, I had one on my B12 engine, connected to EFE clocks. I think 850 ones are the same size. Only needs a re-arrangement of the pins in the connector because the switch drum turns the other way round. EFE switches 100% fit. Ive done a couple now 1 Quote Link to comment
clivegto Posted March 27, 2023 Share Posted March 27, 2023 Think the gs125 fits as well and Les than a tenner from China land. Quote Link to comment
wraith Posted March 27, 2023 Share Posted March 27, 2023 Gs650 is smaller about 25mm instead of APX 35mm where the o ring fits. Quote Link to comment
wraith Posted March 30, 2023 Share Posted March 30, 2023 On 3/26/2023 at 7:18 PM, Captain Chaos said: I know that EZ/ED/EFE switches fit oilcooled motors, I had one on my B12 engine, connected to EFE clocks. I think 850 ones are the same size. Only needs a re-arrangement of the pins in the connector because the switch drum turns the other way round. Can confirm EZ don't fit 3 Quote Link to comment
Wagola Posted April 6, 2023 Share Posted April 6, 2023 On 3/27/2023 at 12:09 PM, clivegto said: Think the gs125 fits as well and Les than a tenner from China land. Hi @clivegto, guess These are available from Eblag ? Quote Link to comment
clivegto Posted April 6, 2023 Share Posted April 6, 2023 20 minutes ago, Wagola said: Hi @clivegto, guess These are available from Eblag ? Yes, not 100% sure there the same size. Quote Link to comment
Joseph Posted April 6, 2023 Share Posted April 6, 2023 On 3/30/2023 at 3:57 PM, wraith said: Can confirm EZ don't fit thats probably not off an EZ 1 Quote Link to comment
Joseph Posted April 6, 2023 Share Posted April 6, 2023 (edited) On 3/27/2023 at 1:09 PM, clivegto said: Think the gs125 fits as well and Les than a tenner from China land. @Wagolafyi : thats the small diameter GN/TU. Not compatible on oil cooled bikes the one featured by @TJSthat fits his 400 is also the same smaller diameter GS use the small diameter All GSX and GSXR 750/1100 OC+WC, and Bandit 600-1200 use the large diameter and can be swapped over Edited April 6, 2023 by Joseph 2 Quote Link to comment
wraith Posted April 6, 2023 Share Posted April 6, 2023 I will keep my eye open, I sent the so called ez one back to the seller. Not having a go at anybody, as I can't say which will and won't fit, so I'm relying on you OSS members who do know Still looking Quote Link to comment
clivegto Posted April 6, 2023 Share Posted April 6, 2023 Perhaps the smaller one could be made to fit the larger one. Quote Link to comment
TJS Posted April 10, 2023 Author Share Posted April 10, 2023 I'm getting ready to test fit a few bigger ID ones from other bikes on my '94 gsxr 750w. Quote Link to comment
Wagola Posted April 10, 2023 Share Posted April 10, 2023 Hi @TJS , where did you get the display from ? Which online store ? cheers Quote Link to comment
Joseph Posted April 10, 2023 Share Posted April 10, 2023 On 4/6/2023 at 3:04 PM, clivegto said: Perhaps the smaller one could be made to fit the larger one. but won't the brass dots not be on the same PCD ? Quote Link to comment
Gixer1460 Posted April 10, 2023 Share Posted April 10, 2023 (edited) 50 minutes ago, Joseph said: but won't the brass dots not be on the same PCD ? Only if Suzuki San decided to create a whole new shifter drum! Easier to shrink a piece of plastic whilst keeping SD machining pattern the same! I think you'll find a Hayabusa has a similar PCD of contacts but different plastic moulding and electronics (more suited to EFI integration) Edited April 10, 2023 by Gixer1460 1 Quote Link to comment
TJS Posted February 12 Author Share Posted February 12 Finally took the risk of ruining the dash... 1 Quote Link to comment
Duckndive Posted February 13 Share Posted February 13 On 3/30/2023 at 2:57 PM, wraith said: Can confirm EZ don't fit that's not EZ as its of a 6 speed motor Quote Link to comment
Gixer1460 Posted February 13 Share Posted February 13 Got yer finger on the pulse of the thread Clive LOL! Quote Link to comment
Duckndive Posted February 13 Share Posted February 13 2 hours ago, Gixer1460 said: Got yer finger on the pulse of the thread Clive LOL! That's what happens when I read threads on phone Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.