Kent jr2 camshaft

[Arne]

I have bought Kent jr2 camshaft for my GSX1100e. It dident come with any papirwork or information about timing. I asked the seller. He says 110 degrees lobe center. For now i have timing as original. The lobes are then 180 degrees apart. Can som one explayn how these camshaft shuld be timed?

[Duckndive]

41 minutes ago, Arne said:

I have bought Kent jr2 camshaft for my GSX1100e. It dident come with any papirwork or information about timing. I asked the seller. He says 110 degrees lobe center. For now i have timing as original. The lobes are then 180 degrees apart. Can som one explayn how these camshaft shuld be timed?

https://www.kentcams.com/support

 

[Gixer1460]

Interestingly, your quoted part number - not found ! Kent only list two cams for the GSX11 - SUZ 5 (street) and SUZ 17 (race)!

[johnr]

these are on eblag listed as jr2.

eblag number 254105191580

[Duckndive]

10 hours ago, johnr said:

these are on eblag listed as jr2.

eblag number 254105191580

i dont think kent sell them direct  as they are there "SPS" own spec which it lists

these are the stage 1 'road and track ' JR2 spec. 5.87mm Cam Lift, 253 degrees duration.These Cams give good mid range power n excellent top end boost;

[kja.busa]

I used to set mine at 108, 108, they were (i think) G3's.

[LLD]

"JR" stands for Jan Roelofs, the retired tuner from the Netherlands who designed the profiles. Kent was using them to grind on original cores.

Now you can get them From Nick at SPS

 

 

 

[Reinhoud]

Does it has the stock timing marks? If yes, use that.