Bolts go where diagram

[NorseRider]

Hey OSS,

So... I had everything neatly standing in their own boxes after dissasembling the entire engine... I went and knocked everything over, and to be honest... I am lost lol.. I cant remember where things will go..

 

Anyone who can help me out?

[gsxwill]

If you can't find parts film on Internet, i found going on robinsons foundry site and looking at there parts film you can see the dimensions of each bolt, which should help you a bit 

[Swiss Toni]

Are you talking about outer case bolts? if so, just drop the bolts into the covers on the bench, and see how much thread you've got to play with. Move them around until you're happy! Use a bit of cardboard next time? Hello, by the way!

[NorseRider]

Its more or less everything, the whole engine is dissambled

[wraith]

If they are oily them come out of the inside of the engine, if they are clean/old road crud and oil they came from the outside 

Sorry couldn't help myself, main ones are the M10 bolts for the crankcase Half's, the rest, if they fit (not to long/short) they will do.

I've built lots of engine's that I've not had the OEM bolts for.

[Duckndive]

Maybe Eblag item number: 275655440060  would help 

Edited February 2, 2023 by Duckndive

[Runningdog]

Parts diagram has bolt sizes, a start, at any rate.

[davecara]

https://www.cmsnl.com/suzuki-gsx750e-1980-t-01-02-04-6-16-17-18-21-22-24-25-26-27-30-34-39_model13703/partslist/FIG-04.html#.Y-5MRnbP200